DTV auto tuning, manual tuning,
manual tuning for
NOTE: As new services are broadcast it will be necessary to
Auto Tuning
Auto tuning will completely1 | Press MENU and use zor xto select SETUP. | |
If available use eto highlight Ant/Cable In and | ||
| then zor xto select Antenna or Cable. | |
2 | Use eto highlight Auto Tuning. Press OK. | |
|
| |
| SETUP |
|
| Menu Language | English |
| Country | UK |
| Ant/Cable In | Antenna |
| Auto Tuning |
|
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
AV Connection
A screen will appear warning that previous digital channels and settings will be deleted.
Auto Tuning
Previous settings will be lost! Press EXIT for no change.
Tuning Mode |
| DTV and ATV | ||
|
|
|
| |
|
| Start Scan |
3 | Use zor xto select DTV then press eto select | |
Start Scan, press OK to start Auto tuning. | ||
|
When the search is complete the Auto Tuning screen will display the services found.
4 | Use eor fto move through the list to select a | |
channel then press OK to view. | ||
|
Manual Tuning
This feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known.
1 | Select DTV Manual Tuning from the SETUP |
| menu and press OK. |
2 | Enter the multiplex number using the number |
buttons or use zor xto adjust the number and | |
| then press eto select Start Scan, press OK. The |
| television will automatically search for that |
| multiplex. |
| When the multiplex is found any channels not |
| currently on the channel list will be added and |
| the channel information at the top of the screen |
| will be updated. |
3 | Repeat as necessary. Press EXIT to finish. |
Manual Tuning for DVB-C
When Ant/Cable In is set to Cable, DTV Manual Tuning will display the following information:
Frequency – a specific frequency can be input for scanning.Modulation – select from five QAM modulation options.Symbol Rate – A specific baud rate (KS/s) can be input for manual scanning.17