Questions and Answers (continued)
| Why are the LEDs on the front of the | ||||
Q television flashing? |
| ||||
A Check the table below. |
| ||||
LED indication | Condition | Solution | |||
|
|
| |||
|
| ||||
|
|
|
|
| |
|
|
| Power ON |
| |
Orange | Green | Green | On Timer is set | – | |
(Solid) | (Solid) | (Solid) | Programme Timer | ||
| |||||
|
|
| is set |
| |
|
|
| Power ON |
| |
Red | Green | Green | On Timer is set | – | |
(Solid) | (Solid) | (Solid) | Programme Timer | ||
| |||||
|
|
| is working |
| |
|
|
| Power ON |
| |
OFF | Green | Green | On Timer is set | – | |
(Solid) | (Solid) | Programme Timer | |||
|
| ||||
|
|
| is NOT set |
| |
|
|
| Power ON |
| |
Orange | OFF | Green | On Timer is NOT set | – | |
(Solid) | (Solid) | Programme Timer | |||
|
| ||||
|
|
| is set |
| |
|
|
| Power ON |
| |
Red | OFF | Green | On Timer is NOT set | – | |
(Solid) | (Solid) | Programme Timer | |||
|
| ||||
|
|
| is working |
| |
|
|
| Power ON |
| |
OFF | OFF | Green | On Timer is NOT set | – | |
(Solid) | Programme Timer | ||||
|
|
| |||
|
|
| is NOT set |
| |
Orange | Green | Red | Power OFF (Standby) |
| |
On Timer is set | – | ||||
(Solid) | (Solid) | (Solid) | Programme Timer | ||
| |||||
|
|
| is set |
| |
|
|
|
|
| |
Red | Green | Red | Power ON (Standby) |
| |
On Timer is set | – | ||||
(Solid) | (Solid) | (Solid) | Programme Timer | ||
| |||||
|
|
| is working |
| |
|
|
|
|
| |
|
|
| Power OFF |
| |
| Green | Red | (Standby) | – | |
OFF | On Timer is set | ||||
(Solid) | (Solid) | ||||
| Programme Timer is |
| |||
|
|
| NOT set |
| |
Orange |
| Red | Power OFF (Standby) |
| |
OFF | On Timer is NOT set | – | |||
(Solid) | (Solid) | Programme Timer is | |||
|
| ||||
|
|
| set |
| |
|
|
|
|
| |
Red |
| Red | Power ON (Standby) |
| |
OFF | On Timer is NOT set | – | |||
(Solid) | (Solid) | Programme Timer | |||
|
| ||||
|
|
| is working |
| |
|
|
|
|
| |
|
|
| Power OFF |
| |
|
| Red | (Standby) | – | |
OFF | OFF | On Timer is NOT set | |||
(Solid) | |||||
|
| Programme Timer is |
| ||
|
|
| NOT set |
| |
|
|
|
| Turn OFF the TV | |
|
| Red | Power protect | and unplug the | |
OFF | OFF | power cord. Plug | |||
Blinks | detection | the power cord in | |||
|
| ||||
|
|
|
| again and turn | |
|
|
|
| ON the TV |
Q How can a camera/camcorder be connected?
A These can be plugged into the connections on the side of television.
Q Why doesn’t REGZA-LINK work?
A If settings on connected
with television. Removing the HDMI cable then replacing it may help. If not turn off the television, remove the power cable from the wall socket, then plug the television back in and switch on.
Will other manufacturers AV equipment Q work with REGZA-LINK (SKY, Home
Cinema etc)?
A Most AV equipment with CEC link should function correctly, however only Toshiba products are assured
to work.
Q Why is there a red light on the back of the television and is it dangerous?
A This is the optical Digital Audio output. Avoid contact with the eyes for any extended period of time.
Q What can be done if the PIN number has been forgotten?
A Use the Master PIN code of 1276, then change to a number of your choice. Ensure that
use the Master PIN by removing the Owner’s Manual.
Q Where is the Serial number/model name located?
A The serial number is located centrally at the rear of the television. It is also printed on the carton box
supplied.
Q Why does the television get hot?
A As with any device using lamps or similar, the television will output a certain amount of heat.
57