Toshiba XV*** i.e, VCR, Skip, Press, Skip:, System, System, Colour, Manual, Search, and use, Channel, Station, Search:, Channel:, Station:, to select, Signal Class:

Press xto select System and use for eto change if required.

ATV manual tuning

The television can be tuned-in manually using ATV Manual Tuning. For example: if the television cannot be connected to a media recorder/decoder with a SCART lead or to tune-in a station on another System.

Use zand xto move across the screen and select any of these ATV Manual Tuning options, then fand eto adjust the settings.

Position System		Colour	Skip	Signal	Channel	Search		Manual	Station
	System			Class			Fine Tuning

Position: The number to be pressed on the remote control.System: Specific to certain areas.

Colour System: Factory set to Auto, should only be changed if problems are experienced, i.e. NTSC input from

	external source.
Skip:		means nothing has been stored or the facility to skip the channel is ON. See page 21.
Signal Class:	C for standard terrestial channels, S for cable channels
Channel:	The channel number on which a station is being broadcast.
Search:	Search up and down for a signal.
Manual Fine Tuning:	Only used if interference/weak signal is experienced. See page 54.
Station:	Station identification. Use the for eand zor xbuttons to enter up to seven characters.

To allocate a position on the television for a decoder and media recorder: turn the decoder on,

insert a pre-recorded film in the media recorder and press PLAY, then manually tune.

1	Select ATV using ATV/DTV. Press MENU and use
	zor xto select the SET UP menu, with e

highlight ATV Manual Tuning, press OK to select.

SETUP
Menu Language	English
Country	UK
Ant/Cable In	Antenna
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
AV Connection

2	Use for eto highlight the position required
	e.g. we suggest Pos. 0 for a media recorder.
		ATV Manual Tuning
		Pos.	Channel	Station
		0	C60
		1	C22	BBC1
		2	C28	BBC2		Different
		3	C25	ITV		Channel
						numbers
		4	C32	CH4
		5	C69		may		be
					displayed
		6	C69
		7	C69

3	Press OK to select. If the position is skipped, Skip
	must be removed before storing.
		ATV Manual Tuning
		System
		0	I	A	C	60	0

4

5	Then press xto select Search.
	Press for eto begin the search. The search
6
	symbol will flash.

ATV Manual Tuning

Searching: Up
0 I A	C 60	0

7	Each signal will show on the television, if it is not
	your media recorder, press for eagain to
	restart the search.
8	When your media recorder signal is found, press
	xto move along to Station. With f, e, zand

xput in the required characters, e.g. VCR.

20