The remote control
SimpleTo select mode | For On/Standby mode |
pressm/llrto PAUSE/STEP press rto PLAY
press qto REWIND
presssto FAST FORWARD presswto EJECT
presspto STOP
press lqto
When using menus the arrows move the cursor on the screen up, down, left or right. OK to confirm your selection
To return to the previous menu Widescreen viewingTo call up text services in analogue mode and interactive services in digital mode
When in TV mode:
MENU To display
ATV/DTV To switch between ATV (analogue
| TV) and DTV (digital TV) |
LIST | To switch between TV and Radio lists |
u | in DTV mode |
Still picture | |
8/9 | Analogue time display |
When using the Programme Guide: | |
lq – 24 hours | |
sl | + 24 hours |
q – 1 page s + 1 page
Inserting batteries and effective range of the remote
Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the right way round. Suitable battery types for this remote are AAA, IEC R03 1.5V.
Do not combine a used, old battery with a new one or mix battery types. Remove discharged batteries immediately to prevent acid from leaking into the battery compartment. Dispose of them in accordance with the disposal instructions in this manual. Warning: batteries must not be exposed to excessive heat such as sunshine, fire or the like.
The performance of the remote control will deteriorate beyond a distance of five metres or outside an angle of 30 degrees from the centre of the television. If the operating range becomes reduced the batteries may need replacing.
6