4.3 Battery pack 4 Replacement Procedures
PORTÉGÉ Z830/835/Satellite Z830 Maintenance Manual (960-883) [CONFIDENTIAL] 4-17
4. Set the base assembly to the cover assembly and secure them with the following
screws.
• M2.5×4B TORX screw ×1 (Described as “4T” in the Figure 4-4)
• M2.5×4B FLAT HEAD screw ×11 (Described as “4” in the Figure 4-4)
• M2.5×10B FLAT HEAD screw ×2 (Described as “10” in the Figure 4-4)
NOTE: Set the base assembly as shown in the figure below.
5. Stick the bottom cap in place.
Base assembly
1
2