3. Software Installation and Setup

Follow the instructions below to install the software (display driver) and set it up using the setup program included in the accompanying CD-ROM. See Q&A if any problem occurs.

Installing the display driver software

1Turn on the display and start up the computer.

2Confirm that the VGA boot screen appears followed by the Windows startup screen.

3Log into Windows as a user with administrative privileges.

4Select Control Panel>Add/Remove Programs from the Start menu, and verify that NVIDIA programs are not installed previously. If programs such as "NVIDIA Display Driver" or "NVIDIA Windows 2000/XP Display Drivers" are listed, remove them and restart the computer (see Q&A: Uninstallation).

5Install the driver using the setup program included in the accompanying CD-ROM.

Note: If installation fails, follow the instructions in Q&A (pages 17 and 18) on reinstallation.

1)The Welcome to the Found New Hardware Wizard appears by itself. Whichever screen appears, click "Cencel."

ENGLISH- 8 -