Toto LVU2E1 Graphics card connectors (female):, DVI cable connector (male):, Note:, Caution, Caution, Landscape, ENGLISH- 6, Display mode, Portrait (default)

See the table below to check in what orientation ME551i2 is.

Display mode	LED behavior upon turn-on
	The LED blinks just once.

Portrait (default)

The LED blinks twice.

Landscape

1Connect one end of the DVI cable supplied with the display to LVU2E1 and the other end to the display and tighten the screws on the connectors.

Caution

Careful not to break the connector pins by trying to insert the DVI connector at an angle.

Graphics card connectors (female):

Note:

•LVU2E1 has two DVI connectors. Make sure to connect the first display to Connector 1 on the left when the card is placed face up.

•LVU2E1 has two dual-link DVI connectors. To use LVU2E1 in dual-link mode, a display and a DVI cable that support dual-link are required. Use the DVI cable supplied with the dual-link display.

DVI Connector 1 DVI Connector 2

Connect the first display	Connect the second
(on the left)	display (on the right)

DVI cable connector (male):

Dual- and single-link support Single-link only

Caution

Do not connect/disconnect the DVI cable while the display is turned on. It could cause a graphics card failure. Connect/disconnect the DVI cables with the display disconnected.

ENGLISH- 6 -