Toto LVU2E1 For multi-displayenvironments on Windows 2000:, All users:, Note:, Note:, Colors, Display, Settings, Settings, Settings, Qadro FX, Quadro FX, Quadro FX

For multi-display environments on Windows 2000:

2K-1: Access the Display Properties dialog box and click the Settings tab.

2K-2: Select "Ture Color (32bit)" from the Colors drop-dowm menu.

2K-3: Set a resolution using the Screen Area slider.

2K-4: Click "Advanced" on the Settings tab, and another dialog box appears.

2K-5: Select the Quadro FX 1500 tab, and a popup menu appears to the side.

Note: When another graphics card coexists, the Quadro FX 1500 tab will not appear. In that case, a display on another card needs to be detached for now. Right-click the subject display icon on the Settings tab and uncheck "Attached" on the right- click menu, or uncheck "Extend my Windows desktop onto this monitor."

2K-6: Select "nView Display Settings" from the menu and "Dualview" from the nView Display Mode drop-down menu on the Qadro FX 1500 tab and click "OK."

Note: See Chapter 4 for detailed information on multi-display modes.

2K-7: When a message prompting restart of the computer appears, click "Restart now."

2K-8: After restarting the computer, click "Finish" on the NVIDIA Dualview installation completion message.

2K-9: A message prompting restart of the computer appears again. Restart the computer. (Go on to All users below or Portrait orientation on ME201L/ME251i/CCL202/ CCL212/CCL250i on page 13.)

All users:

1Select Display Properties>Settings(tab).

Select a display icon, and if the Display section says "Plug and Play monitor on Elza TOTOKU LVU2E1," the corresponding display is connected to LVU2E1.

2In a multi-display setup, select the icon for the first display on this card and verify "Extend my Windows desktop onto this monitor" is checked.

- 11 -ENGLISH