6. Q&A

Prior to installation

What are the supported operating systems?

Windows 2000/XP

How many displays can this card take?

2 displays per card.

What are the supporting TOTOKU displays?

See the table below:

Pixels

Display model

2MP

ME201L, ME213L, ME251i, CCL202, CCL212, CCL250i

3MP

ME315L, ME351i, CCL316, CCL350i

5MP

ME511L, ME551i2, ME551i2 s

Note: Displays below 2MP can also be connected.

What are the supported resolutions?

See the table on page 9.

Is it possible to use multiple graphics cards?

Yes. This graphics card occupies one PCIExpress x16 slot. Graphics cards that fit in the remaining unoccupied slots can be used. However, proper operation is not guaranteed when combined with other graphics cards.

What card do you recommend if another card is necessary?

NVIDIA-based cards. Proper operation of this card is not guaranteed when used with non-NVIDIA cards.

Is this card compatible with DirectX or OpenGL? It is compatible with DirectX 9 and OpenGL 2.0.

How many dual-link DVI ports does this card have?

2

Is there any special setup required for dual-link connection?

Only ME551i2 (not ME551i2 s) supports dual-link. Use the DVI cable supplied with the display and set its refresh rate to 50Hz (see All users on pages 11-12).

Installation

Which display driver should I use?

Use the supplied driver or the designated customized driver for TOTOKU displays. Proper operation of this card is not guaranteed when other display drivers are used.

The VGA boot screen (POST) does not appear. Check the followings:

•The display is not turned on, or the signal cable is not connected properly.

•The graphics card is not inserted all the way in the slot.

•The display is not connected to the right card: There is output from the unplugged on-board VGA or another card.

•Another card is conflicting.

ENGLISH- 16 -