1 | Stand in front of the | Sensor | ||
| toilet. |
| ||
|
| |||
|
|
|
|
|
|
|
|
|
|
The Lid automatically opens
If the lid does not open, move at least 1 foot away from the toilet, wait 10 seconds, and then stand in front of the toilet
again. The lid will automatically open. | 1 |
●When the motion detection sensor detects motion, the "sensor" light on the Main Unit Display will light up.
●The motion detection sensor detects motion and the lid opens automatically.
(lightsup)
When Sitting on the Toilet Seat
●When raised with the controller and you do not sit on the toilet seat for at least 6 seconds, the lid will not automatically close.
After using the toilet, move at least 1 foot away from the toilet.
The lid will automatically close after 90seconds.2
●When the motion detection sensor fails to detect motion, the "sensor" light on the Main Unit Display will go out.
MotionDetection |
Sensor |
(lightgoes out)
1
2
Before cleaning the toilet, be sure to set the Auto Lid OPEN/CLOSE to OFF. This will prevent the lid from opening/closing while cleaning is performed.
Depending upon the height and position of the user, the motion detection sensor may not be able to detect movement. In this case, use the remote controller to push Remote Control button for OPEN/CLOSE toilet seat and lid.
18