Toilet Seat Sensor
Problem | Possible Cause | Solution |
Even when not seated on the toilet seat, the "Rear Wash", "Air deodorizer" and "Warm Air Dryer" functions turn on when the buttons are pushed.
Is the toilet seat sensor covered with something? Make sure that the sensors are not | |
| covered, as this will prevent the |
| infrared light from projecting. |
| (See page 14.) |
|
|
Is the toilet seat sensor dirty or wet? | Remove any dirt or water that is on the |
| toilet seat sensor. |
Even when seated on the toilet seat, the "Rear Wash", "Air deodorizer" and "Warm Air Dryer" functions do not turn on when the buttons are pushed.
The sensors in the toilet seat sensor may not | Change your position on the toilet seat |
work properly depending upon the way in which | or raise the clothing you are wearing |
the user sits on the toilet seat, or stands in front | to allow the sensor to detect bare skin. |
of it, or the color of the clothing or type of fabric |
|
worn. |
|
|
|
Is the toilet seat sensor covered up by your | Make sure that the sensors are not |
clothing? Are the sensors covered with dust or | covered, as this will prevent the |
water? | infrared light from projecting. |
Auto Flush
Problem
The toilet bowl flush function does not automatically turn on.
|
|
|
|
| Possible Cause |
| Solution |
|
|
|
|
| Is the Auto Flush function OFF? When it is OFF, |
| Push the Auto Flush on the remote |
| the "Flush" light on the remote controller display |
| controller to turn it ON. |
| will not be lit up. |
| (See page 21~22.) |
|
|
|
|
| Once the Auto Flush button has been pushed, |
| Use the "Flush" button on the remote |
| the Auto Flush function will not operate again |
| controller to flush the toilet. |
| until 60 seconds have passed. |
|
|
|
|
|
|
| Is the toilet seat sensor or motion detection |
| Make sure that the sensors are not |
| sensor covered with something? |
| covered, as this will prevent the |
|
|
| infrared light from projecting. |
|
|
|
|
| When the remote controller is used to flush the |
|
|
| toilet, the Auto Flush function will not |
|
|
| operate.However, if the motion detection sensor |
| — |
| continues to detect motion for more than 60 |
|
|
| seconds, the Auto Flush function will operate. |
|
|
|
|
|
|
| Is the toilet seat sensor or motion detection |
| Remove any dirt or water that is on the |
| sensor dirty or wet? |
| toilet seat sensor or motion detection |
|
|
| sensor. |
|
|
|
|
| Are there any wall hangings or fixtures located |
| Do not hang any decorations or |
| directly in front of the toilet? |
| fixtures directly in front of the unit. |
|
|
|
|
| In case of sitting for less than 6 seconds, the |
| Sit for more than 6 seconds. See page |
| automatic flush will not activate. | 21. | |
|
|
|
|
| When both seat and lid are opened, but it is not |
| Stand in front for more than 6 |
| stood in front of for more than 6 seconds, the |
| seconds. See page 22. |
| automatic flush will not activate. |
|
|
44
