Thorough Cleaning of the Product
Cleaning the main unit, toilet seat and lid.
●Each component can be disassembled for a thorough cleaning.
| Approximately |
Remove the lid. | 90˚ |
| |
● Open the lid at a 90° angle, grasp with both |
|
hands and lift straight up. |
|
Remove the toilet seat
●Open the toilet seat at a 90° angle, grasp with
both hands and lift straight up.
✲The toilet seat cord cannot be removed.
✲The toilet seat cord can only be extended about 2 inches. Do not apply force to pull the cord out.
✲The toilet seat should only be removed at a 90° angle. Do not apply force to pull up on the seat as this may cause it to break.
●After removing the toilet seat, place it on top of the toilet bowl for cleaning.
Ap
proximatel
90˚
y 
Toilet
seatc
or
d
Approximately2inches 
L
Clean the components
●Refer to the "Daily Care and Maintenance" instructions on page 30.
Make certain that the toilet seat pins | Facingup |
| |
are facing up. (Both right and left pins.) |
|
● If the toilet seat pins are not facing up, push the | L Toiletpin(left)seat |
button on the remote controller. |
Maintenance
31
