TP-Link TD-W8900G manual To setup a virtual server entry

TD-W8900G54M Wireless ADSL2+ Router User Guide

¾Virtual Server Table: The table indicates the information about the Virtual Server entries.

„Server Name: This is the name of the Virtual Server. It is exclusive and must be filled in.

„External Port Start: The base number of External Ports. You can type a service port or leave it blank.

„External Port End: The end number of External Ports. You can type a service port or leave it blank.

„Protocol: The protocol used for this application, TCP, UDP, or TCP/UDP.

„Internal Port Start: The base number of Internal Ports. You can type a service port or leave it blank.

„Internal Port End: The end number of Internal Ports. You can type a service port or leave it blank.

„Server IP Address: The IP Address of the PC providing the service application.

¾Add: Click the Add button to add a new entry.

¾Remove: Select the check box in the table (shown in Figure 5-16)and then click the Remove button, then the corresponding entry will be deleted in the table.

To setup a virtual server entry:

1.Click the Add button on the screen above (pop-up Figure 5-16),and then you will set the new Virtual Server in the next screen (shown in Figure 5-17).

33