TP-Link TL-SG3424P manual Dynamic Router, Ports ：, Filter Config Filter ID

Dynamic Router	Displays the dynamic router ports of this VLAN.
Ports：

Note:

1.The MLD snooping function in a VLAN will take effect when global MLD Snooping function is enabled in 8.2.1 Global Config and the VLAN is created in Chapter 6 VLAN.

2.When the router port aging time or member port aging time is set for a VLAN, this value overrides the value configured globally in 8.2.1 Global Config.

8.2.3 Filter Config

When the switch receives MLD report messages, it examines the multicast filtering ID and filter mode configured on the access port to determine if the port can join the multicast group. If the port can join the multicast group, the switch will add the port to the forward ports list of the multicast group. Otherwise, the switch will drop the MLD report messages. In that way, you can control the multicast groups that users can join in.

Choose the menu Multicast→MLD Snooping→Filter Config to load the following page.

The following entries are displayed on this screen:

	Filter Config
	Filter ID:	Enter the Filter ID which identifies the filter.
	Start Multicast IP:	Enter the start of the IP range.
	End Multicast IP:	Enter the end of the IP range.
	Filter List
	Select:	Select the filter ID you want to change.
	Filter ID:	Displays the filter ID number.
	Start Multicast IP:	Displays the start of the IP range.
	End Multicast IP:	Displays the end of the IP range.
	Note:

The max number of filter entries is 30.

131