Manuals / TP-Link / Computer Equipment / Switch

TP-Link TL-SG3424P manual Ntdp Summary Following entries are displayed on this screen

Models: TL-SG3424P

1 292

Download 292 pages 57.62 Kb

Page 237

Image 237

Choose the menu Cluster→NTDP→NTDP Summary to load the following page.

Figure 14-7 NTDP Summary

The following entries are displayed on this screen:

Global Config

NTDP:Displays the NTDP status (enabled or disabled) of the switch

globally.

NTDP Interval Time: Displays the interval to collect topology information.

NTDP Hops:Displays the hop count the switch topology collects.

NTDP Hop Delay: Displays the time between the switch receiving NTDP request packets and the switch forwarding NTDP request packets for the first time.

NTDP Port Delay: Displays the time between the port forwarding NTDP request packets and its adjacent port forwarding NTDP request packets over.

Port Status

Port:	Displays the port number of the switch.
NTDP:	Displays NTDP status (enabled or disabled) of the current port.

227

Page 237

Image 237

TP-Link TL-SG3424P manual Ntdp Summary Following entries are displayed on this screen

Contents

REV3.0.0 1910011091 JetStream L2 Managed SwitchCopyright & Trademarks FCC Statement Safety Information Contents Gvrp 101 142 NDP Ntdp Tracert 258 Package Contents Intended Readers About This GuideConventions Overview of This GuideLogin to the Switch QoS Appendix a Specifications Overview of the Switch Main FeaturesIntroduction Front Panel Appearance DescriptionName Status Indication  LEDsRear Panel Rear PanelReturn to Contents Login to the Switch LoginConfiguration Return to Contents System Info SystemSystem Summary  Port StatusPort  Port InfoType SpeedSystem Time Device Description Bandwidth Utilization  Device DescriptionDaylight Saving Time Predefined Mode  DST ConfigRecurring Mode Date ModeSystem IP  IP ConfigSystem IPv6  IPv6 features Introduction to IPv6 address Page Link-local address Global unicast address IPv6 Neighbor Discovery Address ResolutionDuplicate Address Detection Neighbor Reachability DetectionPage  Link-local Address Config  Global ConfigIPv6 Link-local AddressGlobal Address Enable globalPrefix Length PreferredUser Config User ManagementUser Table  User Info User ID, Name, Access Level and status OperationUser Status  User TableConfig Backup Config Restore Config Restore System Tools Config Backup Firmware UpgradeSystem Reboot Access SecuritySystem Reset Access Control Access Control Config IP Address & MaskMAC Address  Session Config SSL Config Access User Number Number Control Admin Number Certificate Download SSH Config Key Download Key FileIdle Timeout ProtocolMax Connect Key Type  Configuration ProcedureDownload  Network RequirementsApplication Example 2 for SSH Page Page Return to Contents Port Config SwitchingPort Port SelectDescription Port MirrorSpeed and Duplex Flow Control Mirror Group List Number  Mirror Group Mirroring Port  Mirrored PortEgress Port Security Port Security Learn ModeMax Learned MAC Learned NumPort Isolation  Port Isolation Config Port Isolation List Loopback DetectionLAG LAG Table LAG TableHash Algorithm Static LAG LAG Table Group NumberLacp Config  LAG ConfigLAG will delete this LAG  Lacp Config Lacp Config Following entries are displayed on this screenTraffic Monitor Admin KeyTraffic Summary Port PriorityPackets Tx Packets RxOctets Rx Octets TxTraffic Statistics  Statistics PortStatistics of the corresponding port MAC Address  Search Option Address TableStatic Address MAC Address Displays the MAC address learned by the switch Address Table Displays the corresponding Vlan ID of the MAC address Static Address Table Dynamic Address Aging Config Filtering Address  Dynamic Address TableBind  Filtering Address Table  Create Filtering AddressReturn to Contents Vlan  Link Types of ports 802.1Q Vlan Pvid  Vlan Table Vlan ConfigVlan ID Select ： Select：Enter the ID number of Vlan  Vlan ConfigIs valid or not  Vlan Members Vlan Port Config Link TypeEgress Rule Required. On the VLAN→802.1Q VLAN→VLAN Config Required. On the VLAN→802.1Q VLAN→Port Config page, set Vlan of Port Vlan NameMAC Vlan Optional. On the VLAN→802.1Q VLAN→VLAN ConfigProtocol Vlan  MAC Vlan TableMAC Select  Encapsulation Format of Ethernet Data 802.3 raw 802.2 LLC Snap Protocol Protocol Group Protocol Group TableVlan packets are processed in the following way  Protocol Group Table Protocol Group Config Protocol Template Protocol Group Member Application Example for 802.1Q Vlan Required. On VLAN→802.1Q Vlan →Port Config page, configure  Network Diagram  Configuration ProcedureRequired. On VLAN→802.1Q VLAN→VLAN Config page, create a Operation DescriptionApplication Example for MAC Vlan Application Example for Protocol Vlan Vlan with its Vlan ID as 10, owning Port 12 and Port 13, On Vlan →Protocol Vlan →Protocol Group page, create protocol Required. On Vlan →Protocol Vlan →Protocol Template Gvrp Gvrp Select Port Status Registration ModeConfiguration Procedure  STP Elements Spanning Tree STP Generation  STP Timers Hello TimeTips： Step Operation Mstp Elements  Rstp Elements Port Roles  Port StatesSTP Config STP ConfigVersion Forward DelayHello Time Max AgeSTP Summary STP Summary Port ConfigExtPath PriorityIntPath Edge PortRegion Config Mstp InstancePort Status  Region Config Instance Config Instance Table InstanceClear  VLAN-Instance Mapping Instance Port ConfigInstance ID Path CostPort Role Port Protect STP Security Port Protect  Bpdu FilterTC Protect Application Example for STP FunctionOn Spanning Tree→STP Config→Port Config On Spanning Tree→STP Config→STP ConfigOn Spanning Tree→MSTP Instance→Region Config On Spanning Tree→MSTP Instance→InstanceOn Spanning Tree→MSTP Instance→Region  Configure Switch D  Suggestion for Configuration  Multicast Overview Multicast IPv4 Multicast Address Multicast IP address range Description IPv6 Multicast Address 112 113 Igmp Snooping  Igmp Snooping Fundamentals Snooping Config  Igmp Snooping StatusDescription Displays Igmp Snooping status Member Member Port Time Router Port TimeLeave Time Static Router PortsSnooping→Snooping Config and Port Config Multicast→IGMP Snooping→VLAN ConfigMulticast→IGMP IP-Range IP Range ID Multicast VlanStart Multicast IP End Multicast IP Multicast Vlan On the Multicast→IGMP Snooping→Snooping Config VlanMulticast→IGMP Snooping→Multicast Vlan Snooping→Snooping Config Snooping→Port ConfigStatic Multicast IP VLAN→802.1Q Vlan Create Static Multicast Packet Statistics Static Multicast IP Table Multicast IP Igmp Statistics  MLD Snooping Fundamentals MLD Snooping MLD Snooping Process Global ConfigReport Message MLD SnoopingSuppression Unknown MulticastMulticast Vlan ID Multicast VlanRequired. On the Multicast →MLD Snooping →Global Required. On the Multicast →MLD Snooping →VLANRouter Port Aging Enter the Vlan ID you want to configureNot be aged Select Select the Vlan ID you want to changeFilter Config Filter ID Filter ConfigDynamic Router Ports ：Filter Mode Static MulticastFilter IDs  Static Multicast Config Querier ConfigEnter the Vlan ID Multicast IP Enter the multicast IP address Member PortsMaximum Response Querier ConfigQuery Interval Query Source IPReport Switch has received Received MLD Done Report Switch has received Received MLDv2Auto Fresh Fresh Period1 IPv4 Multicast Table Multicast TableMulticast IP Displays multicast IP address Displays the Vlan ID of the multicast groupMulticast IP Displays the multicast IP 2 IPv6 Multicast TableForward Ports Type Displays the type of the group Priority Mode QoS QoS 802.1Q frame  Schedule ModeSP-Mode DiffServ  Port Priority ConfigPort Priority Displays the LAG number which the port belongs toDscp Priority Required. On QoS→DiffServ→Schedule ModeRequired. On QoS→DiffServ→Port Priority Required. On QoS→DiffServ→802.1P/CoS mapping3 802.1P/CoS mapping  Dscp Priority Config Priority Level Required. On QoS→DiffServ→DSCP PrioritySchedule Mode  Priority and CoS-mapping Config Schedule Mode Config Rate Limit Bandwidth ControlStorm Control  Rate Limit ConfigIngress Rate bps Egress RatebpsPort Broadcast Rate bps  Storm Control ConfigMulticast Rate Bps Port Voice Vlan Mode Voice VlanNumber OUI Address Vendor Security Packet Type Processing Mode  Security Mode of Voice VlanEnter the Vlan ID of the voice Vlan Voice Vlan Select Enable/Disable Voice Vlan functionAging Time OUI address is aging out13 Port Config Port ModeOUI Config Required. On VLAN→802.1Q VLAN→Port Config Required. On VLAN→802.1Q VLAN→Port Config page, clickRequired. On QoS→Voice VLAN→Global Config PoE PoE Config Composition  AdvantagePoE Config PoE Profile Time-Range Summary PoE Time-Range Create PoE Profile  PoE ProfilePoE Time-Range Create PoE Holiday Config Holiday Name Displays the name of the holiday Start Date ACL Time-RangeDetail Holiday Time-Range CreateACL Config Holiday Config Holiday Table ACL Create ACL Summary Create ACL Enter ACL ID of the ACL you want to createRule ID MAC ACLEtherType User PriorityExtend-IP ACL Standard-IP ACL Create Standard-IP ACL Mask Create Extend-IP ACL IP ProtocolTCP Flag Policy Config Policy SummaryPolicy Create Action Create  Create Policy Create Action Policy Binding Binding Table Policy Bind Table Port Binding  Port-Bind ConfigVlan Binding Direction Displays the binding directionApplication Example for ACL  VLAN-Bind ConfigEnter the ID of the Vlan you want to bind  VLAN-Bind TableOn ACL→ACL Config→ACL Create page, create ACL On ACL→ACL Config→Standard-IP ACL page, select ACL IP-MAC Binding Network SecurityHost Name SourceIP Address Protect TypeProtect Type Select the Protect Type for the entry Manual BindingDisplays the Vlan ID here Port Displays the number of port connected to the HostARP Scanning  Scanning Option Dhcp SnoopingEnd IP Address Scan Dhcp Working Principle Network diagram for DHCP-snooping implementation Option  Dhcp Cheating Attack Dhcp Cheating Attack Implementation Procedure183 Decline Flow Control Customization Circuit ID Remote IDSelect Port Trusted Port MAC Verify Flow Control ARP Inspection  Imitating Gateway Cheating Gateway  Cheating Terminal Hosts 10 ARP Attack Cheating Gateway Man-In-The-Middle Attack  ARP Flooding Attack  ARP Detect ARP DetectARP Detect  Trusted PortARP Defend Required. On the Network Security→IP-MACNetwork Security→ARP  ARP Defend ARP StatisticsDefend Current Speed Illegal ARP Packet DoS DefendDoS Attack Type Description 12.4  Configure Defend Table Defend Type Displays the Defend Type name The Mechanism of an 802.1X Authentication System  Architecture of 802.1X Authentication 802.1X Authentication Procedure 19 PAP Authentication Procedure  Guest Vlan  802.1X Timer802.1X Authentication MethodGuest Vlan Guest Vlan IDServer Timeout Supplicant TimeoutQuiet Period Retry TimesRadius Server Control ModeControl Type AuthorizedKey Modify Authentication KEY Authentication PortPrimary IP Secondary IPRequired. On the Network Security→802.1X→Port  Snmp Overview Snmp Snmp Management Frame  Snmp Versions MIB Introduction  Snmp Configuration Outline 1. Create ViewSnmp Config  Local Engine Remote Engine MIB Object ID Snmp ViewView Type View NameSnmp Group  Group Config Group Table Snmp UserAuth Password Auth ModePrivacy Mode User NamePrivacy Password  Community ConfigSnmp Community Access MIB ViewCommunity Name Notification On the SNMP→SNMP Config→SNMPTimeout IP ModeUDP Port User Notification Table Rmon Rmon Group Rmon Group FunctionEvent Config History Control History Control Table  Event Table Alarm ConfigSample Type VariableRising Threshold Rising EventFalling When the sampled value is under the Falling  Cluster Role Cluster14.1 NDP Neighbor Info Introduction to Cluster NDP Summary  Neighbor Neighbor Info NDP  Port Status Displays the port number of the switchNDP Config EnableDetail ： Ntdp DisableDevice Table  Device TableRole Ntdp SummaryHops Neighbor InfoNtdp Summary Following entries are displayed on this screen Port Displays the port number of the switchNtdp Hop Delay Ntdp ConfigNtdp Port Delay Ntdp Interval TimeCluster Summary Cluster Global Cluster Global Config Cluster Cluster Config Role Change  Current RoleApplication Example for Cluster Function 14 Cluster Configuration for Individual SwitchOn Cluster→NDP→NDP Config page, enable NDP  Network DiagramOn Cluster→NTDP→NTDP Config page, enable On Cluster→Cluster→Cluster Config page, configureOr On Cluster→Cluster→Cluster Topology On Cluster→Cluster→Member Config page, select Lldpdu Format Lldp TLV TLV type TLV Name Description Usage Basic Management TLVOrganizationally Specific TLV Power Via MDI TLV Configuration/Status TLVTLV Type Description Port Description TLV System Capabilities TLVLldp Basic ConfigLldp Port Config  Lldp Port ConfigLocal Info Device Info Local Info Device StatisticsLldp Statistic Information  Global StatisticsTransmit Total ErrorsReceive Total Discards LLDP-MED Parameters Config Extended Power-Via-MDI TLVTLV Type Function Location Identification TLV Inventory TLVLLDP-MED Port Configuration  LLDP-MED Port Config Location Identification Parameters  Included TLVsEmergency Civic AddressLLDP-MED Local Information LLDP-MED Neighbor Information Maintenance System MonitorCPU Monitor 16.2 Log Memory MonitorLevel Description Log Table Content Log Info Module253 Local Log  Local Log ConfigRemote Log Log BufferBackup Log  Log HostHost IP Error Device DiagnosticsCable Test PairNetwork Diagnostics  Ping ConfigPing Tracert  Tracert ConfigStandards Appendix a SpecificationsTransmission Rate Transmission MediumOperating Environment Figure B-1 Appendix B Configuring the PCsFigure B-3 263 264 Now Appendix C Load Software Using FTP Hardware InstallationConfigure the Hyper Terminal 267 Figure C-5 Port Settings Download Firmware via bootUtil menuAre you sure to upgrade the firmwareY/N y TP-LINK upgrade You can only use the port 1 to upgrade270 Appendix D 802.1X Client Software Installation Guide272 273 Figure D-7 InstallShield Wizard Complete Uninstall SoftwareFigure D-11 Uninstall Complete Configuration276 Figure D-16 Connection Status FAQ278 Appendix E Glossary Generic Multicast Registration Protocol Gmrp Multicast SwitchingGroup Attribute Registration Protocol Garp Ieee 802.1DRemote Authentication Dial-in User Service Radius Port AuthenticationLayer Link AggregationSimple Network Management Protocol Snmp Secure Shell SSHSimple Network Time Protocol Sntp Spanning Tree Algorithm STA

Figure 14-7 NTDP Summary

The following entries are displayed on this screen:

Global Config

Port Status

Port:

Displays the port number of the switch.