Trane ctv-prc007-en manual Features and Performance Benefits Testing, Factory

Factory

Features and Performance

Benefits Testing

Factory Testing for

Assured Performance

To prove that your chiller will perform as promised, Trane offers factory performance testing, which you can witness.

Trane provides laboratory-grade, calibrated performance testing on ARI approved test loops that proves the performance of the chiller tailored to your application. The test provides:

•Confirmed efficiency

•Confirmed capacity

•Smooth trouble-free start-up confirmed through factory testing and commissioning of both chiller and controls

Trane believes centrifugal chiller testing is so important that we invested over $2 million in CenTraVac testing facilities.

Testing is in accordance with ARI Standard 550/590 and calibration of instrumentation meets or exceeds the National Institute of Standards Technology (NIST).

The industry has responded to the demand for more efficient chillers by developing machines with component mix-matching and many money saving options. It’s possible that with the thousands of component combinations available, a specific chiller combination may be laboratory tested for the first time.

Trane offers two levels of CenTraVac performance testing:

•A performance test at design conditions plus a certified test report.

•A customer-witnessed performance test at design conditions plus a certified test report.

Trane is part of the ARI 550/590 certification program. The selection program and machines bear the ARI seal of approval. Performance testing is a key part of this program. While the certification program is technically sound, a factory run test, with your machine on the test stand, is still the best way to confirm machine performance and a trouble-free start-up.

The single package design of the	panel are tested before final assembly.
CenTraVac chiller allows testing of each	After assembly, performance testing of
assembled chiller at the factory. Actually	the chiller can confirm proper operation
all components including the evaporator,	and virtually eliminate jobsite start-up
condenser, compressor and control	problems.

During customer witnessed performance tests of Trane CenTraVac chillers, a nickel can be balanced on the edge of the compressor-motor assembly, demonstrating the extremely low vibrations generated by the unit while operating at full and part load conditions.

10 CTV-PRC007-EN