Trane CVGF manual Physical, Dimensions

Physical	50 and 60 Hz SI
Dimensions	(English Units)

Figure PD-1 – Model CVGF Cooling Only		Figure PD-2 – Model CVGF Cooling Only Without Unit
With Unit Mounted Starter		Mounted Starter (for Remote Mounted Starter)
	914 mm (36”)		914 mm (36”)
	RECOMMENDED		RECOMMENDED
	CLEARANCE		CLEARANCE

HEIGHT

HEIGHT

WIDTH

WIDTH

457 mm (18')

RECOMMENDED

CLEARANCE

LENGTH

Dimensions – SI Units (English Units)

		Clearance			Unit Dimensions		Unit Dimensions
		Tube Pull			With Unit Mounted Starters		Without Unit Mounted Starters
Comp.	Shell Size	CL1	CL2	Length	Height	Width	Width
400-500	500	4235 mm	1118 mm	4083 mm	2094 mm	1984 mm	1929 mm
		(13’ 10 3/4”)	(3’ 8”)	(13’ 4 3/4”)	(6’ 101/2”)	(6’ 6 1/8”)	(6’ 3 15/16”)
500	700	4235 mm	1850 mm	4083 mm	2200 mm	2038 mm	1988 mm
		(13’ 10 3/4”)	(3’ 11”)	(13’ 4 3/4”)	(7’ 2 5/8”)	(6’ 8 1/4”)	(6’ 6 1/4”)
650	700	4235 mm	1850 mm	4083 mm	2270 mm	2083 mm	2076 mm
		(13’ 10 3/4”)	(3’ 11”)	(13’ 4 3/4”)	(7’ 5 3/8”)	(6’ 10”)	(6’ 9 3/4”)
800-1000	1000	4235 mm	1219 mm	4083 mm	2521 mm	2305 mm	2257 mm
		(13’ 10 3/4”)	(4’)	(13’ 4 3/4”)	(8’3 1/4”)	(7’6 3/4”)	(7’ 4 7/8”)

CL1 at either end of machine and is required for tube pull clearance.

CL2 is always at the opposite end of machine from CL1 and is for water box plus clearance.

–Recommended clearance (D1) for machine with unit mounted starter is 914 mm (36”)

–Recommended clearance (D2) for machine without unit mounted starter is 1219 mm (38”) Unit length is not included for the waterbox.

See page 19 for waterbox dimension

1 8 CTV-PRC001-GB