Trane CVGF Microprocessor Controls with CH530, DynaView Operator Interface, Features and Benefits

Features and Benefits

Microprocessor Controls with CH530

DynaView Operator Interface

DynaView™ is the unit-mounted control panel and also serves as the main processor and operator interface. It has a touch-sensitive overlay on a 1/4 VGA display.

DynaView presents information through an intuitive, tabbed- navigation system. Alternate languages can be downloaded to the control panel, which can hold English plus two other languages at one time.

DynaView receives information from and communicates information to the other devices on the chiller’s communications link. DynaView performs the Leaving Chilled Water Temperature and Limit Control algorithms, arbitrating capacity against any operating limit against which the chiller may find itself working.

•Auto/Stop commands

•Status (all subsystems)

•Setpoint adjustment (daily user points)

•10 active diagnostics

•Mode overrides

•ASHRAE chiller log

DynaView can be connected to the service tool using a standard 9-pin male, 9-pin female RS-232 serial cable. The serial connection is located at the bottom of the DynaView panel behind a sliding door.

Touch sensitive screen provides information and navigation at the same time

Change setpoints and settings with touch screen commands

Displays chiller status and operating points. Touch for more information

lf diagnostic exists, an alarm indicator will appear. Press for detail.

Auto / Stop

Contrast Control

Extensive diagnostics customized to the chillar type installed-centrifugal, helical rotary, or absorption

CTV-PRC001-GB 5