Dimensions/Weights
Clearance
GEH Clearance Dimensions Access to the unit for service pur- poses should be provided at instal- lation. All 1/2 through 5 ton configurations require an 18" (457
mm)surround clearance from oth- er mechanical and electrical equip- ment (where shown) to enable panel removal from the unit for service/maintenance ability. Some local codes require a greater ser- vice clearance than listed below. Check all code requirements prior to unit installations.
Equipment containing a
mm)clearance. This configuration is typically applied in a corridor in- stallation, where space limitations force the left or right side of the unit against a wall.
Service clearance dimensions for the 6 through 15 ton horizontal in- cludes a two side access appropri- ate for control and blower motor/ wheel access. Some local codes require a greater service clearance than listed below. Check all code requirements prior to unit installa- tions.
GEH 1/2 through 5 Ton Clearance
GEH 6 through 15 Ton Clearance
8 |
