Installer’s Guide
n
m TYPE
USED THROUGH CHIMNEY THAT VENTS
ANOTHER GAS APPLIANCE
STAINLESS STEEL |
VENTCAP |
(OPTIONAL) |
EE CAUTION | 6 IN. MIN. |
|
,SEAL BETWEEN FLANGE, PIPE, COUPLING AND METAL PANEL
WITH HI TEMP RTV SILICONE SEALANT
FLUE PIPE
COUPLING
SUPPORT
FLANGE
CEILING
GALVANIZED FIRESTOP SHOULD
BE FABRICATED WITH
HOLE FOR SUPPORT FLANGE (12" x 12" PANEL OR 12" DIA MIN.)
CLEARANCE ( 0" ACCEPTABLE FOR PVC VENT PIPE )
( 1" ACCEPTABLE FOR TYPE
VENTING THROUGH CEILING
.THROUGH UNUSED CHIMNEYPVC PLASTIC VENTING - ONLY
SUPPORT THE SINGLE WAL
STAINLESS STEEL GAS
VENTING AND CENTER IT IN
THE CHIMNEY OPENING WI
ANGLES AS SHOWN OR
ANOTHER EQUIVALENT
MANNER.
NOTE:
HORIZONTAL VENTING
TO VERTICAL VENTING
▲! CAUTION
Do NOT run vent through chimney for wood burning or oil furnaces or incinerators.
If remaining free area between single wall flue pipe and masonry chimney is to be used for another gas
STAINLESS STEEL
VENTCAP
(OPTIONAL)
SEE CAUTION
FLUE PIPE
OUPLING TO SUPPORT
PE FROM ANGLES
R OTHER SUITABLE
UPPORT METHOD
FLUE PIPE
6 IN. MIN.
SUPPORT THE SINGLE
WALL FLUE PIPE AND
CENTER IT IN THE
CHIMNEY OPENING WI
ANGLES AS SHOWN O
ANOTHER EQUIVALEN
MANNER.
COUPLING
AS REQUIRED
NOTE:
HORIZONTAL VENTING
TO VERTICAL VENTING
appliance venting area must be sufficient to vent that appliance and that appliance must be con- nected to chimney with separate entry openings.
IMPORTANT –
The single wall flue pipe joints must be sealed.
The 90° elbow connection to vertical pipe must be sealed to prevent condensate leakage to base of ma- sonry chimney.
▲! CAUTION
Do NOT run vent through chimney for wood burn- ing or oil furnaces or incinerators or any other gas appliance.
IMPORTANT –
The single wall flue pipe joints must be sealed.
The 90° elbow connection to vertical pipe must be sealed to prevent condensate leakage to base of ma- sonry chimney.
24 |
