Transcend Information TS16G-64GCF400 TS16G~64GCF400, Transcend Information Inc, Idle - 97h or E3h

TS16G~64GCF400 400X CompactFlash Card

￿Idle - 97h or E3h

This command causes the CompactFlash Storage Card to set BSY, enter the Idle mode, clear BSY and generate an interrupt. If the sector count is non-zero, it is interpreted as a timer count with each count being 5 milliseconds and the automatic power down mode is enabled. If the sector count is zero, the automatic power down mode is disabled. Note that this time base (5 msec) is different from the ATA specification.

Bit ->	7	6	5	4		3	2		1	0
Command (7)				97h or E3h
C/D/H (6)		X		Drive				X
Cyl High (5)					X
Cyl Low (4)					X
Sec Num (3)					X
Sec Cnt (2)			Timer Count (5 msec increments)
Feature (1)					X

￿Idle Immediate - 95h or E1h

This command causes the CompactFlash Storage Card to set BSY, enter the Idle mode, clear BSY and generate an interrupt.

Bit ->	7	6	5	4		3	2		1	0
Command (7)				95h or E1h
C/D/H (6)		X		Drive				X
Cyl High (5)					X
Cyl Low (4)					X
Sec Num (3)					X
Sec Cnt (2)					X
Feature (1)					X

￿Initialize Drive Parameters - 91h

This command enables the host to set the number of sectors per track and the number of heads per cylinder. Only the Sector Count and the Card/Drive/Head registers are used by this command.

Bit ->	7	6	5	4		3		2	1	0
Command (7)					91h
C/D/H (6)	X	0	X	Drive			Max Head (no. of heads-1)
Cyl High (5)					X
Cyl Low (4)					X
Sec Num (3)					X
Sec Cnt (2)				Number of Sectors
Feature (1)					X

￿NOP - 00h

Transcend Information Inc. 74

V1.0