Transition Networks C4TEF10XX-10X Cable Specifications -- Continued, Fiber Cable, T1/E1 Cable

S4TEF10xx-10x

Cable Specifications

The physical characteristics must meet or exceed ITU specifications.

Fiber Cable

Cable Specifications -- Continued

T1/E1 Cable

Category 3: (minimum requirement)

Bit Error Rate:

Single mode fiber (recommended): Multimode fiber (recommended): Multimode fiber (optional):

S4TEF1011-100

Fiber Optic Transmitter Power:

Fiber Optic Receiver Sensitivity:

Link Budget:

S4TEF1013-100

Fiber Optic Transmitter Power:

Fiber Optic Receiver Sensitivity:

Link Budget:

S4TEF1014-100

Fiber-optic Transmitter Power:

Fiber-optic Receiver Sensitivity:

Link Budget:

S4TEF1015-100 (long haul) Fiber-optic Transmitter Power: Fiber-optic Receiver Sensitivity: Link Budget:

S4TEF1016-100(extra long haul) S4TEF1017-100(long wave length) Fiber-optic Transmitter Power: Fiber-optic Receiver Sensitivity: Link Budget:

S4TEF1018-100

Fiber-optic Transmitter Power:

Fiber-optic Receiver Sensitivity:

Link Budget:

S4TEF1029-100

S4TEF1029-101

Fiber-optic Transmitter Power:

Fiber-optic Receiver Sensitivity:

Link Budget:

S4TEF1029-102

S4TEF1029-103

Fiber-optic Transmitter Power:

Fiber-optic Receiver Sensitivity:

Link Budget:

<10-9

9µm 62.5/125 µm

100/140, 85/140, 50/125 µm

1300 nm multimode

min: -19.0 dBm	max: -14.0 dBm
min: -30.0 dBm	max: -14.0 dBm
11.0 dB
1300 nm multimode
min: -19.0 dBm	max: -14.0 dBm
min: -30.0 dBm	max: -14.0 dBm
11.0 dB
1310 nm single mode
min: -15.0 dBm	max: -8.0 dBm
min: -31.0 dBm	max: -8.0 dBm
16.0 dB
1310 nm single mode
min: -8.0 dBm	max: -2.0 dBm
min: -34.0 dBm	max: -7.0 dBm
26.0 dB

1310 nm single mode

1550 nm single mode

min: -5.0 dBm	max: 0.0 dBm
min: -34.0 dBm	max: -7.0 dBm
29.0 dB
1300 nm multimode
min: -19.0 dBm	max: -14.0 dBm
min: -30.0 dBm	max: -14.0 dBm
11.0 dB

1310 nm (TX)/1550 nm (RX) simplex

1550 nm (TX)/1310 nm (RX) simplex

min: -13.0 dBm	max: -6.0 dBm
min: -32.0 dBm	max: -3.0 dBm
19.0 dB

1310 nm (TX)/1550 nm (RX) simplex

1550 nm (TX)/1310 nm (RX) simplex

min: -8.0 dBm	max: -3.0 dBm
min: -33.0 dBm	max: -3.0 dBm
25.0 dB

	Connector:							RJ-48C
	Electrical network connection:							Single 4-wire (Tip/Ring - Tip1/Ring1)
	Mechanical arrangement:							8-position miniature modular jack
	Usage:							1.544 Mb/s access lines
	Interface codes:							04DU9 (any applicable)
	Cable type:
	Long Haul T1/E1:							0db, -7.5dp, -15db, -22db
	E1:							E1 3.0V, 120 ohm
	J1:							0-655’, 110 ohm
	DSX-1:							0-133’, 133-266’, 266-399’,
								399-533’, 533-655’, 100 ohm
	(ring) R								R
			1					1		Transmit
	(tip) T		2					2	T
											dry contact A
			3					3
	(ring) R1								R1
			4					4		Receive
	(tip) T1		5					5	T1
											dry contact B
			6					6
			7					7	(Not Used)
			8					8
			to the				from the
		network					media converter
RS-232 Cable (included)
	Connectors:							6-pin DIN and DB-9
	Gauge:							24 to 22 AWG
	Attenuation:							20 dB/1000 ft. @ 10 MHz
	Differential characteristic impedance: 100 ohm +/- 10% @ 10 MHz
	Maximum cable distance:							<10 ft (3.2 m) @ 56 kb/s or higher
	Signal Ground 3 & 5						1		2	Receive Data
					3	5	6
				1			2
	Transmit Signal		1				7		7	Request Data
							3
	Receive signal		2	2			8		3	Transmit Data
					4	6	4
	Clear to send		9				9		5	Signal Ground
							5
					DIN 6-Pin			DB-9

The fiber optic transmitters on this device meets Class I Laser safety requirements per IEC-825/CDRH standards and complies with 21 CFR1040.10 and 21CFR1040.11.

12 24-Hour Technical Support: 1-800-260-1312International: 00-1-952-941-7600 techsupport@transition.com -- Click the “Transition Now” link for a live Web chat. 13