Transition Networks SMACF10XX Configure Reporting Units, Manage SMACF10xx Units at Web Interface

8.	Optionally Change Passwords To optionally set on-site
	passwords by changing the default community names, at the
	superuser command-line prompt, type and enter:
	[SU] CPSMM100> SET PUBLIC=<public name>
	[SU] CPSMM100> SET PRIVATE=<private name>
	[SU] CPSMM100> SAVE
9.	Set IP, Gateway, and Subnet Addresses At the superuser
	command-line prompt, type and enter IP, gateway, and subnet
	addresses (in format: nnn.nnn.nnn.nnn):

[SU] CPSMM100> SET IP=<IP address>

[SU] CPSMM100> SET NETMASK=<mask>

[SU] CPSMM100> SET GATEWAY=<gateway address>

[SU] CPSMM100> SAVE

10.Enter "secret word" At the superuser command-line prompt, type and enter:

[SU] CPSMM100> SECRET=<WORD>

[SU] CPSMM100> SAVE

Configure Reporting Unit(s)

11.	Connect Reporting Unit to Terminal Refer to steps 4 and 5 for
	direction and terminal settings.
12.	Bring up Reporting Unit Interface at Terminal (SMACF10xx
	Management Unit ONLY) First set switch at back of SMACF10xx
	Management Unit to DOWN position. (All SMACF10xx Reporting
	Units) Press <enter> at terminal to bring up Reporting Unit Main
	Menu.
13.	Optionally Change CLI Login Password Pressing <enter> is the
	default Transition Networks Reporting Unit password. Optionally
	set an on-site Reporting Unit log-in password, using the command:

p<xxxxxxxx>

14.Enter "secret word" Enter a secret word (identical to the secret word entered in the SMACF10xx Management Unit or the CPSMM-xxx PointSystem™ Management Module), using the command:

c<xxxxxxxx>

Repeat steps 11-14 for all installed SMACF10xx Reporting Units.

Manage SMACF10xx Units at Web Interface

15.Open Internet Browser Use browser versions IE 4.0, Netscape 4.0, or Opera 4.0 and above.

16. Enter Management Unit or Management Module IP Address At

WWW location prompt, enter the IP address (in format: nnn.nnn.nnn.nnn) of the configured SMACF10xx Management Unit or CPSMM-xxx PointSystem™ Management Module.

17.Enter Password At the password prompt that comes up, enter the case-sensitiveTransition Networks default password private (unless password was changed in step 8).

A display showing available SMACF10xx units comes up. Refer to on- line help available from the display for detailed direction for managing the SMACF10xx units.

© 2002 TRANSITION Networks.

All rights reserved. No part of this work may be reproduced or used in any form or by any means – graphic, electronic, or mechanical – without written permission from TRANSITION Networks.

Printed in the U.S.A. 33265.A

34