Traulsen TU072LT, TU044LT VII. k - SETTING THE DATE, VII. l - SETTING DAYLIGHT SAVINGS TIME

VII. MICROPROCESSOR CONTROL (continued)

VII. k - SETTING THE DATE:

The date must be set in order for the data storage memory to correctly log events. Follow the instructions to enter the

service access code on page 8. When the control displays				Thermostat Set Point High, press the down arrow
key	until the control display reads		Date. Press the set button SET		. The display will show
		(year). The right two numbers will be flashing. Press the arrow keys			to set the year. When the

correct year is displayed, press the set button SET . The display will show (month). The right two num-

bers will be flashing. Use the arrow keys to set the month. When the correct month is displayed, press

the set button	SET . The display will show			(day). The right two numbers will be flashing. Press the arrow
keys		to set the day. When the correct day is displayed, press the set button SET . The display will then
read		Date. You can use the up or down arrow keys			to scroll to the next parameter, press the
alarm cancel button to exit			)) .
			)

VII. l - SETTING DAYLIGHT SAVINGS TIME:

This parameter is preset at the factory to automatically adjust the 24-hour clock for Daylight Savings Time. Follow the in-

structions to enter the customer access code on page 8. When the control displays				Thermostat Set Point High,
press the down arrow key	until the display reads		Daylight Savings Time. Press the set button
SET . The display will show
		Daylight Savings Time (Yes, automatically adjust for Daylight Savings Time).

For “YES” press the set button SET ,for “NO” press the up or down arrow key . The display will read

Daylight Savings Time (no). Press the set button Time. You can press the up or down arrow keys

SET . The display will read Daylight Savings

to scroll to the next parameter or press the alarm cancel

button to exit ))) .

-12-