Traulsen TU072HT, TU044LT, TU100HT, TU072LT, TU044HT VII. h - ADJUSTING THERMOSTAT SET POINT LOW

VII. MICROPROCESSOR CONTROL (continued)

VII. h - ADJUSTING THERMOSTAT SET POINT LOW:

This parameter sets the low point of the desired cabinet temperature range. Typically, freezers will range from –6°F to -4°F (-21°C to –20°C) and refrigerators will range from 32°F to 34°F ( 0°C to 1°C) for this parameter setting. This parameter is preset at the factory and does not have to be adjusted unless the customer chooses to do so. Note: Set Point Low and Set Point High cannot be set to the same temperature. There will be at least 1-2 degree difference between the two settings.

Follow the instructions to enter the service access code on page 8. When the control

displays Thermostat Set High, press the down arrow key until the control

display reads

Thermostat Set Point Low. Press the set button SET .

Use the arrow keys to adjust the temperature to your desired setting. When the display shows the temperature you want press the set button SET .

The display will then read Thermostat Set Point Low.

You can use the up or down arrow keys to scroll to the next parameter .

	))
or press the alarm cancel button to exit	)	.

VII. i - CHANGING THE TEMPERATURE SCALE:

The temperature scale determines if the temperature displayed will be in degrees

Fahrenheit or degrees Celsius.

Follow the instructions to enter the customer access code on page 8. When the control

displays Thermostat Set High, press the down arrow key until the control

display reads	Temperature Scale. Press the set button SET .
The display will start with the current setting either		for degrees Fahrenheit

or

for degrees Celsius. Use the arrow keys to toggle between the options.

When the display shows the scale you want press the set button SET .

The display will then read

Temperature Scale.

You can use the up or down arrow keys to scroll to the next parameter

or press the alarm cancel button to exit	)) .
	)

-10-