Traulsen TU044HT VII. e - ENTER THE SERVICE ACCESS, VII. MICROPROCESSOR CONTROL continued

VII. MICROPROCESSOR CONTROL (continued)

VII. e - ENTER THE SERVICE ACCESS:

Use the security code 0, A, 1					and the following instructions:
Press the set button SET.	The display will read					Service Access.
Press the set button SET .
The display will show three zeros with the left zero flashing
Press the set button SET .
The display will show three zeros with the center zero flashing
Press the down arrow key				to sequence through F, E, d, C, b, A, 9, 8, 7,…etc.
When you reach A press set SET.
The display will show zero, A, zero with the right zero flashing							.
Press the up arrow key		to sequence through 1, 2, 3, 4, 5, 6, 7, 8, 9, A, b,…etc.
When you reach 1 press set SET.
The display will read			Thermostat Set Point High. Press SET				to view and SET again to exit.

You are now in the SERVICE PARAMETERS.

-8-