Traulsen TU100HT VII. q - SETTING THE AUDIBLE ALARM STYLE, VII. r - VIEWING SENSOR TEMPERATURES

VII. MICROPROCESSOR CONTROL (continued)

VII. q - SETTING THE AUDIBLE ALARM STYLE:

These parameters will allow the customer to turn on/off the audible alarm feature on the INTELA-TRAUL®control. The audible alarm is preset from the factory to OFF. The customer can choose between an audible alarm that sounds for 3 seconds then automatically turns off, or a continuous audible alarm that must be manually acknowledged. Regardless of this feature’s setting, visual alarm text will display when conditions warrant.

To adjust this setting, follow the instructions to enter the customer access code on page 8. When the control displays

	Thermostat Set Point High, press the up arrow key				until the display reads				Audible Alarm
Style. Press the set button			SET . The display will read	OFF. Use the arrow keys					to scroll be-
tween		for the 3-Second Audible Alarm Burst or			for Continuous Audible Alarm. When the display
shows your choice of style, press the set button SET . The display will then read						thermostat Set Point High.
							))
Use the arrow keys			to scroll to the next parameter or press the Alarm Cancel Button					) to exit.

VII. r - VIEWING SENSOR TEMPERATURES:

These parameters allow a service technician or customer to view the temperature of all sensors within the unit. The temperatures cannot be adjusted.

Follow the instructions to enter the customer access code on page 8. When the control displays Thermostat Set Point

High, press the up arrow key unit the display reads

sor or Disharge Line Sensor or press the SET button

Cabinet Air Sensor Evaporator Coil Sen-

SET . The display will read the temperature

of the designated sensor.

Press the UP or DOWN arrow keys to scroll through the parameters or press the ALARM CANCEL button

))) to exit.

-16-