•• ! • • • • • • • —Driver installation for Win 95/98/NT
8.Select the desired IRQ Level, I/O Port Address and Con- nection Type.
You must select an IRQ and I/O port address that is not being used by ano- ther device; otherwise, you will have a system conflict error.
To see the available IRQ and I/O port addresses, use the Windows NT Diag- nostics program in Windows NT Administrator tools. Refer to the Win- dows NT online help for information on Windows NT diagnostics.
9.Click OK to continue. Windows will configure the Ether- net Card. You are returned to the Network window.
10.Click Close to exit the Network window. Windows NT 4.0 will bind the adapter with the network component.
When Windows NT is finished binding the adapter to the network component, you are prompted to restart the system.
11. Click Yes to finish the installation.
! 13
