Appendix B
Enabler program error messages
CARDGO.EXE
Here is the list of error messages the CARDGO.EXE may display.
Error | Message | Solution |
|
|
|
[Error 1] | “The PCMCIA controller is | There is no PCMCIA con- |
| not present or recognized” | troller on your computer. |
|
| Install a PCMCIA controller |
|
| from another computer. |
|
|
|
[Error 2] | “There is no card in the | Ensure that the PC card is |
| PCMCIA slot. Insert the | correctly inserted into the |
| card.” | PCMCIA slot. |
|
|
|
[Error 3] | “The card in PCMCIA slot is | Ensure that the PC Card in |
| not PCMCIA 10/100 Mbps | the notebook’s PCMCIA |
| Ethernet Card. Insert it” | slot is the Ethernet Card |
|
| and that it is correctly in- |
|
| serted. |
|
|
|
[Error 4] | “The I/O ports do not re- | Change to another I/O port |
| spond. Change to another | using /IO=xxx. Refer to |
| one” | “Manual Installation” in |
|
| Chapter 4. |
|
|
|
[Error 5] | “The I/O ports specified are | Valid I/O addresses are |
| invalid. Change to another | 240, 280, 300, 320, 340, |
| one” | and 360. |
|
|
|
[Error 6] | “The IRQ specified is invalid. | Valid IRQ values are 3, 4, |
| Change to another one” | 5, 9, 10, and 11. |
|
|
|
33
