TRENDnet PF-16 PCMCIA Ethernet Card RJ-45 connector LEDs, Disconnecting the Ethernet Card

•• ! • • • • • • • —Hardware installation

Ethernet Card RJ-45 connector LEDs

The following illustration shows the Ethernet Card RJ-45 con- nector LEDs:

Fast	ACT		LNK
Ethernet		1 0 0 M

AC T 10 0 M LNK

Figure 2-4: RJ-45 connector LEDs

The following table describes the meaning of the LEDs:

LED	MEANING
ACT	Indicates transmit or receive activity. It is normally off.
	When there is packet transmit or receive activity, this LED
	is on.
100M	Indicates the connection speed. When off, the connection
	speed is 10 Mbps. When on, the connection speed is 100
	Mbps.
LNK	Indicates whether the link is active or not. When lit, indi-
	cates that the link is active. When off, indicates that the link
	is inactive.

Disconnecting the Ethernet Card

The Ethernet Card RJ-45 connector is designed to lock in place when connected to the Ethernet Card. The following illustration shows the location of the clips:

￿￿! ￿￿￿￿￿￿￿5