•• ! • • • • • • •
Installing the driver for Linux
Follow these instructions to install the driver for the Linux op- erating system:
1.Log on as the “root”.
2.Copy the driver code from the Installation disk using the following syntax:
mount /dev/fd0 /mnt
cp /mnt/linux/en0100a.tar /tmp cd /tmp
tar xvf en0100a.tar
3. Generate the driver using the following syntax:
cd /tmp/en0100a make all
If the path of your PCMCIA source is not
If the path of your loadable module is not “/lib/modules/2.0.35”, you need to modify the “DEST1” & “DEST2” variables of the “Makefile” file. Consult your Linux documentation for details.
4. Install the driver using the following syntax:
make install
5.Configure the PCMCIA 10/100 Ethernet card using the following syntax:
cd /etc/pcmcia
Add the following text to the “config” file. The config file must be in “write” mode.
! 29
