5.Select DHCP Client to have the
If Static IP address is selected you would need to configure the following:
IP address: The assigned IP address should match your network. This IP address should not be used by any other network device on your network.
Subnet Mask: In most cases, the default Subnet Mask (255.255.255.0) should be fine.
Default Gateway: Enter the IP address of your router for the Default Gateway.
Then click Next.
Note: It is recommended to manually configure the LAN Interface Settings (IP address, Subnet Mask, Default Gateway) in case you need to access the device in the future. Please write down the IP settings for future reference.
6.Select Manual Setup and then click Next.
7. Click Scan.
8.Select a SSID and then click Select. The SSID is the wireless network name of your wireless network (e.g. wireless router or access point).
9.Click Next.
5
