4. Wi-Fi Protected Setup (WPS) Push Button Setup
Note:
1:Wi-Fi Protected Setup (WPS) allows you to quickly connect to your wireless router or access point.
2:Do not connect/install the TEW-687GA to your network until instructed to do so. Make sure your network adapter settings are set to obtain an IP address automatically (see troubleshooting section).
1.Find a location where you would like to place the TEW-687GA. The location must be within the wireless coverage of your router or access point. Please refer to the wireless tips sections for additional information.
2.Connect the Power Adapter to the TEW-687GA and then to a power outlet. (EU Versions will have a power button on the back. Push the
power button to the “On” position. ). Wait 30 
seconds for the TEW-687GA to boot up.
3.Press and hold the WPS button on your wireless router or access point for 2 seconds. The example shows a TEW-691GR.
