TRENDnet User’s Guide
Installation
1.Verify that you have an Internet connection when connecting your computer directly to the xDSL/Cable modem.
2.Turn off your xDSL/Cable modem.
3.Disconnect the Ethernet cable (also called network cable) from your xDSL/Cable modem and your computer.
4.Connect one end of a network cable to one of your router LAN ports
5.Connect one end of a network cable to your router WAN port. Connect the other end of the network cable to your xDSL/Cable modem network port.
Basic Router Setup
6.Connect the included power adapter to your router Power Port and then to an available power outlet. Push the On/Off Power Switch on your router to the “On” (inner) position.
7.Turn on your xDSL/Cable modem.
8.Verify that the following front panel LED indicators on your router: Power (Solid Green), Status (Blinking Green), LAN 1, 2, 3, or 4 (Solid/Blinking Green), WAN (Solid/Blinking Green), and WLAN (Blinking Green)
© Copyright 2011 TRENDnet. All Rights Reserved. | 7 |
