The cooker is supplied with a 3 core flexible supply cord incorporating a 13amp plug fitted. In the event of having to change the fuse, a 13amp ASTA approved (BS 1362) fuse must be used. Should the plug need to be replaced for any reason, the wires in the mains lead are coloured in accordance with the following code:
Green and Yellow | - Earth |
Blue | - Neutral |
Brown | - Live |
-Connect the green and yellow (earth) wire to the terminal in the plug, which is marked
with the letter 'E' or the earth symbol 
or coloured green and yellow.
-Connect the blue (neutral) wire to the terminal in the plug, which is marked with the letter 'N' or coloured black.
-Connect the brown (live) wire to the terminal in the plug, which is marked with the letter 'L' or coloured red.
NOTE: The earth wire should be about 2 cm longer than the live and neutral wires.
Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.
A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard.
Ensure that the cut off plug is disposed of safety.
Before connecting check that:
•The plug used for connection is easily accessible when the appliance is installed.
Permanent Connection
In the case of a permanent connection, it is necessary that you install a double pole switch between the cooker and the electricity supply (mains), with a minimum gap of 3mm, between the switch contacts and of a type suitable for the required load in compliance with the current electric regulations.
The switch must not break the yellow and green earth cable at any point.
Ensure that the cooker supply cord does not come into contact with surfaces with temperatures higher than 50 deg. C.
21
