Fixing and use of the 2 clips provided with the cooker
The enclosed gas hose fixing clips must be fixed to the back of the cooker, dependant on the position of the supply bayonet connector (see fig.).
When selecting the most suitable position for the clips, please ensure that the gas hose cannot come into contact with any part of the “Hot zone” (indicated by the shaded areas on the illustration) when pushing the cooker into its final position.
Finally, secure the hose into the clips.
Rigid Connection
Where it is not possible to make the connection using a rubber hose, a rigid pipe work connection must be used.
Recommendations when using an appliance flexible connector are as follows:
-For NATURAL the gas installation pipes to the termination point shall comply with:
Specification for installation of
Connection shall be by means of an appliance flexible connector for use with a
Flexible hoses, end fittings and sockets for gas burning appliances – BS 669;
-The appliance flexible connector should not be subjected to undue forces either in normal use or whilst connected or disconnected; The socket which the plug of the appliance flexible connector fits should be permanently attached to a firmly fixed gas installation pipe and positioned such that the appliance flexible connector hose hangs freely downwards (see fig.);
-The appliance flexible connector should be positioned such that it will not suffer mechanical damage, e.g. abrasion from the surrounding kitchen furniture, which may be moved in use such as a drawer or door, or by being trapped by any stability device.
The
22
clip
Clip Position
Options
|
| Right angled |
|
| bayonet socket | Distribuitor | |
|
| incorporating | |
Adaptor |
| spring loaded | pipe |
| valve |
| |
backplate | Female |
| |
Copper pipe |
| elbow |
|
Alternative backplate elbow
Cooker hose with
bayonet fixing
Straight bayonet | Cooker hose with |
socket | bayonet fixing |
incorporating |
|
spring loaded |
|
valve |
|
