Operation (Normal Conditions) (continued)
TURNING THE UPS OFF
•Press the front “OFF” button. Your load will still be energized. The inverter is now off, but your UPS is not fully deactivated. The LCD Display will show “ON BYPASS.”
•Turn the Main Input Switch and Bypass Input Switch Circuit Breakers OFF. Your load will no longer be energized, and the LCD display will be dark.
NOTE: If the UPS System remains off for an extended period of time, it should be turned back on periodically to allow the internal batteries to recharge. The UPS System should be turned on and the internal batteries should be recharged at least one uninterrupted
SELF-TESTING
When you turn the UPS ON, it will perform a brief
Display sequence when AC input power is present:
SELF TESTING...
RECTIFIER OK
CHARGER OK
BATTERY OK
DC TO DC OK
INVERTER TEST
Display sequence when AC input power is absent: (possible only with the "Battery Start" Switch)
SELF TESTING...
BATTERY OK
DC TO DC OK
INVERTER TEST
LCD DISPLAY SELECT BUTTON
Momentarily press the “SELECT” button on the front panel to browse through different power readings on the LCD Display.
BYPASS OUTPUT
R:XXXV R: XXX.XV
S:XXXV S: XXX.XV
T:XXXV T: XXX.XV
(Bypass & Output Voltage)
Press "SELECT" Button
OUTPUT | LOAD |
R: XXX% | XXX.XA |
S: XXX% | XXX.XA |
T: XXX% | XXX.XA |
(Output Load & Current)
Press "SELECT" Button
MAINS | INVERTER |
R: XXXV | R: XXX.XV |
S: XXXV | S: XXX.XV |
T: XXXV | T: XXX.XV |
(Mains & Inverter Voltage)
Press "SELECT" Button
BYPASS: XX.X Hz
MAINS: XX.X Hz
OUTPUT: XX.X Hz
INVERTER: XX.X Hz
(Bypass, Mains, Output & Inverter Frequency)
Press "SELECT" Button
CHARGE FLOATING
CHARGER: XXX.XV
BATTERY: XXX.XV
BATTERY: XXX.X%
(Charger Mode, Charger/Battery Voltage & Battery Percentage)
Press "SELECT" Button
SN: | XXX |
DC BUS: | XXV - XXV |
TEMP: | XXX.X˚C |
VERSION: | XXX |
(Serial Number, DC BUS Voltage, Temperature & Firmware Version)
|
|
| Press "SELECT" Button | |
|
|
|
|
|
| ON: | UPS START |
| |
| OFF: | UPS BYPASS | (Button Functions) | |
| SEL: | UPS MESSAGE | ||
| ENT: | SET UPS |
| |
|
|
| Press "SELECT" Button | |
|
|
|
|
|
8
