Feature Identification
1AC Outlets: 3 NEMA
2Illuminated ON/OFF Switch: When you set the switch to the ON position, the Inverter provides AC power by converting DC power from the connected battery. Set the switch to the OFF position to shut down the Inverter and conserve the battery's charge when you are not using connected equipment. Also set the switch to the OFF position to reset the Inverter if it has shut down due to low battery or overload. See the Operation section for more information.
3Cooling Fan: This fan regulates the internal temperature of the Inverter and prolongs service life.
4DC Power Terminals: These positive and negative terminals connect to the battery via
5Main Ground Screw: Connect to earth ground or to a vehicle or boat grounding system in order to properly ground the Inverter. See the Battery Connection section for instructions.
Low Battery Alarm (not shown): An internal circuit automatically detects low battery voltage and shuts down the Inverter to preserve your vehicle's battery. Turn the ON/OFF switch to the OFF position if the alarm sounds. See the Operation section for more information.
Overload Alarm (not shown): An internal circuit automatically detects overload conditions and shuts down the Inverter as a protective measure. Turn the ON/OFF switch to the OFF position if the alarm sounds. See the Operation section for more information.
2 |
5 |
1 |
5 |
3 |
4 |
Operation
Operating Modes
After mounting and connecting your Inverter according to the instructions in this manual, use the illuminated ON/OFF switch to choose the Inverter's operating mode.
ON: When you set the switch to the ON position, the Inverter provides AC power to connected equipment by converting DC power from your vehicle's battery.
OFF: Set the switch to the OFF position to shut down the Inverter completely, preventing it from drawing power from your vehicle's battery. Also set the switch to the OFF position to reset the Inverter if it has shut down due to low battery or overload.
Resetting the Inverter
The inverter may shut down and cease supplying AC power under certain conditions in order to protect itself, the battery and connected equipment. Follow these instructions to restore normal operation:
•Low Battery Alarm Reset: If the Inverter has shut down due to low battery, (1) set the ON/OFF switch to the OFF position,
(2)allow the Inverter to cool, (3) start the vehicle's engine to recharge the battery, (4) allow the battery to recharge completely and (5) set the ON/OFF switch to the ON position.
•Overload Alarm Reset: If the Inverter has shut down due to overload, (1) set the ON/OFF switch to the OFF position,
(2)allow the Inverter to cool, (3) remove the equipment that caused the overload, (4) confirm that any equipment now connected does not exceed the rated wattage of the Inverter and
(5)set the ON/OFF switch to the ON position.
3
