Tripp Lite SMART1500LCDXL owner manual UPS Features

Features

UPS Features

MODE

MUTE

ON/OFF/MODE Button: Press and hold for 2 seconds to turn on the UPS and 2.5 seconds to turn the UPS off. When the UPS is on, tap this button repeatedly to advance through LCD display screens. If utility power is absent, pressing and holding this button for 2.5 seconds will “cold-start” the UPS; i.e. turn it on and supply power to the outlets from its batteries.

MUTE/ENTER Button: Use this button to toggle selection options for: self-test, enable/disable alarm, LCD brightness, Sensitivity Control, Scroll Control and the External Battery Setting Control. This button can also be used to temporarily mute an active alarm by briefly pressing it.

Tel/DSL Line Protection Jacks: These jacks protect equipment against surges over a single phone line. Connecting your equipment to these jacks is optional. Your UPS will work properly without this connection. An RJ-11 cable will be included with your UPS.

USB and RS-232 Communication Ports: These ports can connect your UPS to any computer for automatic file saves and unattended shutdown in the event of a power failure. Use with Tripp Lite’s PowerAlert Software (available as a FREE download at www.tripplite.com) and appropriate USB or DB9 cable. Both a USB and a DB9 cable will be included with your UPS.

NOTE:

1.This connection is optional. The UPS will work properly without this connection.

2.This UPS System provides basic communication compatibility with most integrated Windows®, Macintosh®, and Linux® power management applications.

Battery Backup Protected/Surge Protected Outlets: Provide both battery backup and surge protection. Plug your computer, monitor and other critical equipment into these outlets. Note: Do not plug laser printers into the UPS.

Removable Mounting Hardware: Adapts the UPS to either tower or rackmount (2U) applications.

External Battery Connector: Use to connect a Tripp Lite external battery pack for additional runtime. Refer to instructions available with the battery pack for complete connection information and safety warnings.

NOTE: Visit Tripp Lite on the Web at www.tripplite.com/support/battery/index.cfm to locate the specific battery for your UPS.

Resettable Input Circuit Breaker: Protects your electrical circuit from overcurrent draw from the UPS load. If this breaker trips, remove some of the load, then reset it by pressing it in.

8

201103012 933072.indb 8 3/8/2011 1:43:13 PM