Storage & Service

Storage

Before storing your PDU, be sure all connections have been disconnected and all breakers are turned OFF. Also replace any input or output access covers so as not to damage any contacts.

Service

Your Tripp Lite product is covered by the warranty described in this manual. A variety of Extended Warranty and On-Site Service Programs are also available from Tripp Lite. For more information on service, visit www.tripplite.com/support. Before returning your product for service, follow these steps:

1.Review the installation and operation procedures in this manual to insure that the service problem does not originate from a misreading of the instructions.

2.If the problem continues, do not contact or return the product to the dealer. Instead, visit www.tripplite.com/support.

3.If the problem requires service, visit www.tripplite.com/support and click the Product Returns link. From here you can request a Returned Material Authorization (RMA) number, which is required for service. This simple on-line form will ask for your unit’s model and serial numbers, along with other general purchaser information. The RMA number, along with shipping instructions will be emailed to you. Any damages (direct, indirect, special or consequential) to the product incurred during shipment to Tripp Lite or an authorized Tripp Lite service center is not covered under warranty. Products shipped to Tripp Lite or an authorized Tripp Lite service center must have transportation charges prepaid. Mark the RMA number on the outside of the package. If the product is within its warranty period, enclose a copy of your sales receipt. Return the product for service using an insured carrier to the address given to you when you request the RMA.

Warranty & Warranty Registration

2-Year Limited Warranty

TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of two years from the date of initial purchase. To obtain service under this warranty, you must call TRIPP LITE or an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation charges prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of purchase. This warranty does not apply to equipment which has been damaged by accident, negligence or misapplication or has been altered or modified in any way. This warranty applies only to the original purchaser who must have properly registered the product within 10 days of purchase.

The warranties of all TRIPP LITE surge suppressors are null and void if they have been connected to the output of any UPS system. The warranties of all TRIPP LITE UPS Systems are null and void if a surge suppressor has been connected to its output receptacles.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.

WARRANTY REGISTRATION

Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!* * No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

FCC Part 68 Notice (United States Only)

If your Modem/Fax Protection causes harm to the telephone network, the telephone company may temporarily discontinue your service. If possible, they will notify you in advance. If advance notice isn’t practical, you will be notified as soon as possible. You will be advised of your right to file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, operations or procedures that could affect the proper operation of your equipment. If it does, you will be given advance notice to give you an opportunity to maintain uninterrupted service. If you experience trouble with this equipment’s Modem/Fax Protection, please call Tripp Lite Technical Support at (773) 869-1234 for repair/warranty information. The telephone company may ask you to disconnect this equipment from the network until the problem has been corrected or you are sure the equipment is not malfunctioning. There are no repairs that can be made by the customer to the Modem/Fax Protection. This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs. (Contact your state public utility commission or corporation commission for information.)

Regulatory Compliance Identification Numbers

For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique series number. The series number can be found on the product nameplate label, along with all required approval markings and information. When requesting compliance information for this product, always refer to the series number. The series number should not be confused with the marking name or model number of the product.

WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and electronic equipment from Tripp Lite they are entitled to:

Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)

Send the new equipment back for recycling when this ultimately becomes waste

The policy of Tripp Lite is one of continuous improvement. Specifications are subject to change without notice.

1111 W. 35th Street, Chicago, IL 60609 USA

www.tripplite.com/support

10

201008071 • 932949-EN

Page 10
Image 10
Tripp Lite SUPDMB20KHW, SUPDMB20KIEC owner manual Storage, Service

SUPDMB20KIEC, SUPDMB20KHW, SUPDMB20K specifications

The Tripp Lite SUPDMB20K is a high-performance, versatile power distribution unit (PDU) designed to meet the demands of data centers, server rooms, and networking environments. This unit stands out for its reliable performance, ease of use, and capacity to manage power distribution effectively. With a robust and durable construction, the SUPDMB20K is built to support the demanding needs of critical electrical equipment.

One of the standout features of the Tripp Lite SUPDMB20K is its 20 kVA capacity, which provides ample power to multiple devices simultaneously. This ensures that servers, switches, routers, and other essential hardware operate optimally without risking overloads or burnout. The PDU includes a variety of outlet configurations, allowing users to plug in different types of equipment without needing additional adapters.

Another significant technology embedded in this unit is its built-in surge protection. This safeguard is crucial for preventing damage caused by power surges or spikes, which can be detrimental to sensitive electronics. The SUPDMB20K also features advanced monitoring capabilities, providing real-time data on power usage, voltage levels, and environmental conditions. This allows IT administrators to make informed decisions about energy consumption and enhance the overall efficiency of their operations.

The Tripp Lite SUPDMB20K is designed for easy installation and management. Its rack-mountable design fits seamlessly into standard data center racks, saving valuable floor space. The unit is equipped with a user-friendly LCD screen that displays vital information, facilitating quick assessments of power status and performance metrics.

Additionally, compatibility with various communication standards makes it easy to integrate the SUPDMB20K into existing network management systems. It can work with both SNMP and MODBUS protocols, enabling remote monitoring and management through a user-friendly interface. This capability is particularly beneficial for organizations seeking centralized control over their power infrastructure.

Customer support is another highlight of the Tripp Lite brand, as they offer expert guidance and assistance to ensure that users get the most out of their products. The combination of high capacity, advanced protection features, and user-friendly management tools makes the Tripp Lite SUPDMB20K an excellent choice for businesses that require reliable power distribution solutions in critical environments. Whether you are upgrading existing infrastructure or building a new data center from scratch, the SUPDMB20K meets the essential criteria for power distribution needs.