Managing the UPS | Tripp Lite UPS SNMPWEBCARD specification

Managing the UPS

e. Save settings. The card will then reboot; depending on the selected configuration settings, it will take 2-5 minutes for the card to become initialized.*

5.Prepare SNMPWEBCARD for Operation

a. Remove the cable connecting the SNMPWEBCARD to the computer.

b. Test network configuration by pinging the IP address given to the SNMPWEBCARD.

c. If test is successful, replace the UPS accessory slot plate and secure it with screws to hold the SNMPWEBCARD firmly in position.

* Or configure other SNMPWEBCARD settings as explained in this chapter.

5

Image 7

Tripp Lite UPS SNMPWEBCARD instruction manual Managing the UPS

Contents

UPS Snmpwebcard Table of Contents Snmpwebcard System Requirements Chapter Introduction Item Description Snmpwebcard Details Package Contents Selecting an IP Address Chapter ConfigurationTerminal Mode Configuration Setting Value Managing the UPS Snmp Chapter Navigating the Snmpwebcard Web Pages Chapter Browser InterfaceEstablishing a Connection To Log On to the UPS Adapter Device Information Menu BarDevice Summary Action Menu Alarm StatusAvailable Actions Loads Screen Loads Device Settings Menus Contacts Events Contact Settings Menu Network Configuring Snmp Trap Destinations Snmp Menu TCP/IP MenuTelnet Menu Web Menu 10 Set Date/Time System 12 Event Logs Event Logs Problem Solution Unable to perform Snmp set operations Chapter TroubleshootingProblem IP Address of the Snmpwebcard is unknown Solution Problem Unable to perform Snmp get operations Solution Environmental Specifications Appendix a Specifications Name Description PS/2 ConnectorPS/2 Connector Pins Serial Port Adapter Card