Loads Screen | Tripp Lite UPS SNMPWEBCARD specification

SNMP Adapter User’s Guide

Loads

The Loads Screen provides a graphical interface to turn on and off any controllable load segment or outlet on a UPS system that supports load management. For each controllable load segment, a representative on/off control will be displayed in the load table. If the UPS does not support individual load control, only one load segment will be displayed. This allows for input of information identifying the equipment that is connected to the UPS. (See Figure 4-4.)

Figure 4-4: Loads Screen

Page 12

Image 12

Tripp Lite UPS SNMPWEBCARD instruction manual Loads Screen

Contents

UPS Snmpwebcard Table of Contents Chapter Introduction Snmpwebcard System Requirements Snmpwebcard Details Item Description Package Contents Chapter Configuration Terminal Mode ConfigurationSetting Value Selecting an IP Address Managing the UPS Chapter Snmp Chapter Browser Interface Establishing a ConnectionTo Log On to the UPS Adapter Navigating the Snmpwebcard Web Pages Menu Bar Device InformationDevice Summary Alarm Status Action MenuAvailable Actions Loads Loads Screen Settings Menus Device Events Contacts Contact Settings Menu Configuring Snmp Trap Destinations Network TCP/IP Menu Telnet MenuWeb Menu Snmp Menu System 10 Set Date/Time Event Logs 12 Event Logs Chapter Troubleshooting Problem IP Address of the Snmpwebcard is unknown SolutionProblem Unable to perform Snmp get operations Solution Problem Solution Unable to perform Snmp set operations Appendix a Specifications Environmental Specifications PS/2 Connector PS/2 Connector PinsSerial Port Adapter Card Name Description