Troy-Bilt 12212, 12211 Bolo TINES, Wheels, Two ea. Refs 1733398 Hex Locknut, 3/8-16 1982612

PARTS LIST

Models 12211 and 12212

BOLO TINES, WHEELS

9

1310

13

NOTE 1: Custom Tilling Tines are available for your tiller. These are special hard-faced tines that are thicker than standard tines.

IMPORTANT: Left and right sides of tiller are determined by standing in operator position and facing direc- tion of forward travel.

REF.	PART
No.	No.	DESCRIPTION	QTY.
1	1100043	Hex Hd. Screw, 3/8-16 x 1-1/4*	16

21270-2A Bolo Tine-single. Right hand tine used on left side of tiller. (Incl.

		two ea. Refs. 1 and 3)	8
3	1733398	Hex Locknut, 3/8-16	18
5	1982612	Hex Hd. Screw, 3/8-16 x 2, Grade 8 ....	2

71270-1A Bolo Tine-single. Left hand tine used on right side of tiller. (Incl.

	two ea. Refs. 1 and 3)	8
8	1902154010 Tine Holder. For left and right sides ....	2

--1901118 Bolo Tine Replacement Set (Incl. eight ea. right hand and left hand tines,

		and sixteen ea. Refs. 1 and 3)	1
--	2475-1	Custom Tilling Bolo Tine, Left hand
		tine (see Note 1 above)	8

REF.	PART
No.	No.	DESCRIPTION	QTY.
--	2475-2	Custom Tilling Bolo Tine, Right hand
		tine (see Note 1 above)	8
--	10802	Custom Tilling Bolo Tine Replacement
		Set (Incl. eight ea. right hand and
		left hand custom tines, and sixteen
		each of Refs. 1 and 3)	1
9	2706-01	Wheel and Tire Assy., left side,
		4.10 x 6 tire on 6” wheel (A)(B)	1
10	2706-02	Wheel & Tire Assy., right side,
		4.10 x 6 tire on 6” wheel (A)(B)	1
11	9380	Clevis Pin, .312 x 1-3/4	2
12	9338	Hitch Pin	2
13	1917487	Wheel and Tire Assembly (C)(D)	2

* Specify GRADE 5 if ordering part locally.	(A)	For Model 12211 – S/N 122111100101-122111199999
	(B)	For Model 12212 – S/N 122121100101-122121199999
	(C)	For Model 12211 – S/N 122111200101-122111299999
42	(D)	For Model 12212 – S/N 122121200101-122121299999