6.If repacing the entire assembly, put the new friction wheel assembly in place and follow the steps in reverse to re- assemble. If you only want to replace the friction wheel rubber continue with step 7.

7.Remove the four screws from the friction wheel assembly.

See Fig. 7-11.

Screws

Side Plates

Rubber Ring

Figure 7-11

8.Remove the friction wheel rubber from between the friction wheel plates.

9.Reassemble new friction wheel rubber to the friction wheel plates and hub, tightening the four screws in rotation and with equal force (between 6 ft.-lbs. and 9 ft.-lbs.).

10.Position the friction wheel assembly up onto the pin of the shift rod assembly, and slide the shaft through the assembly. See Fig. 7-9. Reassemble in reverse order.

26Section 8— Service