ENGINE AND SNOWTHROWER MAINTENANCE

the hole. Allow any excess to drain out of the gear box. Wipe any excess gear oil off the gear box. Reinstall the plug.

8.Touch up any scratches, unpainted or rusty sur- faces with paint.

Wheel Drive Cable Adjustment

CAUTION Before adjusting the wheel drive cable, shut the engine off, allow it to cool, disconnect the spark plug

A wire and prevent it from touching the spark plug, and remove the engine ignition key.

Failure to do this could result in personal injury or property damage.

R

\~:---- G

Figure 5-5

1.Remove the two screws that secure the sides of the belt cover (Figure 5-4, Item F) to the snow- thrower. Take the belt cover off the snowthrower.

2.Push the idler pulley (Figure 5-5, Item G) to the left until the belt (Figure 5-5, Item H) is tight.

3.Adjust the idler stop (Figure 5-5, Item I) so that there is a gap of 3/8-inch between the left-hand edge of the idler stop and the inner surface of the frame. Make this adjustment by loosening the idler screw stop nut (Figure 5-5, Item J) and slid- ing the idler stop right or left as needed Re-tighten the idler stop nut when you have the 318-inch gap.

4.Check the tension on the wheel drive cable. It should just be taut when the Wheel Drive Lever is not engaged. If it is slack or too taut, adjust the cable tension at the adjustment section (Figure 5-6, Item K).

5.Make sure that the spark plug wire is discon- nected and not touching the spark plug. Pull the recoil starter rope while watching the engine wheel drive pulley (Figure 5-8, Item L). The belt should not move on this pulley. If the belt does move, decrease the 3/8-inch gap you set in Step 3.

6.Reinstall the belt cover (Figure 5-4, Item F) on the snowthrower.

Wheel Drive Belt Removal and Installation

CAUTION Before removing or install- ing the wheel drive belt, shut the engine off, allow it to cool, disconnect

A the spark plug wire and prevent it from touching the spark plug, and remove the engine ignition key.

Failure to do this could result in personal injury or property damage.

To remove the wheel drive belt:

1. Remove the two screws that secure the sides of the belt cover (Figure 5-4, Item F) to the snow- thrower. Take the belt cover off the snowthrower.

2. Remove the worm gear and support (Figure 5-7,

hand side of the

---------=

Item M) from the left

~ M

snowthrower by

removing the bolt

~ N

(Figure 5-7, Item N).

 

 

Figure 5-6

Figure 5-7

21

Page 22 Page 24
Page 23
Image 23
Troy-Bilt 5210R manual Wheel Drive Cable Adjustment, Wheel Drive Belt Removal and Installation
Page 22 Page 24

5210R specifications

The Troy-Bilt 5210R is a versatile and durable snow blower designed for homeowners who seek efficient snow removal solutions. With its powerful features and advanced technologies, the 5210R stands out in the competitive landscape of outdoor equipment.

At the heart of the Troy-Bilt 5210R is its robust 208cc engine, which delivers reliable performance when tackling both light and heavy snowfall. The engine is engineered for easy start-ups, ensuring you can quickly get to work even in cold weather conditions. The machine's 24-inch wide clearing width allows you to efficiently clear large areas, while its 21-inch intake height enables it to handle deep snow with ease.

One of the standout features of the Troy-Bilt 5210R is its In-Dash Headlight. This essential addition enhances visibility during early morning or evening snow removal tasks, making it a safer and more user-friendly option. The control panel is designed with ergonomics in mind, featuring easy-to-reach levers and controls that allow users to adjust speed and chute direction with minimal effort.

The 5210R boasts an innovative 180-degree adjustable chute, which allows for precise snow placement. This feature is especially useful for directing snow away from walkways or driveways and keeping your property clear and safe. Additionally, the chute is made from durable materials, ensuring it can withstand the rigors of harsh winter conditions.

The snow blower's heavy-duty tires provide excellent traction and stability on various terrains, allowing users to navigate through snow-covered surfaces easily. Troy-Bilt's signature power steering feature further enhances maneuverability, making it simple to turn and control the machine even in tight spaces.

For added convenience, the Troy-Bilt 5210R features an easy-to-clean design that simplifies maintenance. The accessible parts allow for quick inspections and cleaning, ensuring the machine remains in peak condition season after season.

In conclusion, the Troy-Bilt 5210R snow blower is a powerful, reliable, and user-friendly tool for tackling winter weather challenges. With its robust engine, adjustable chute, and user-oriented design, it provides homeowners with an effective solution for maintaining clear driveways and walkways during snowy months. This makes the 5210R an excellent investment for anyone looking to enhance their snow removal arsenal.
Top Page Image Contents