Maintaining Your Log Splitter, Gib Adjustment

Maintaining

Your Log

Splitter

Adjustment

Bolt

Jam Nut

Gib

Lock Nut

Gib Adjustment

Periodically remove and replace the “gibs” (spacers) between the wedge assembly and the back plate.

NOTE: The gibs may be rotated and/or turned over for even wear.

1.Loosen the lock nuts under each back plate and slide the gibs out. See Figure 5-1.

2.Turn or replace the gibs.

3.Reassemble the back plate and secure with the lock nuts.

4.Readjust the bolts on the side of the wedge assembly.

WARNING: Before cleaning, lubricating, repairing, or inspecting, disengage the control lever and stop engine. Disconnect the spark plug wire and

WARNING

Do not at any time make any adjustments without first stopping engine, disconnecting spark plug wire, and grounding it against the engine. Always wear safety glasses during operation or while performing any adjustments or repairs.

Before cleaning, lubricating, repair- ing, or inspecting, disengage the control lever and stop engine. Disconnect the spark plug wire and ground it against the engine to prevent unintended starting. Always wear safety glasses during operation or while performing any adjust- ments or repairs.

Higher pressure could cause the hoses to burst, cylinder to rup- ture, and intense fluid to be released, which could result in serious personal injury.

Figure 5-1

WARNING: Do not at any time make any adjustments without first stopping engine, disconnecting spark plug wire, and grounding it against the engine. Always wear safety glasses during operation or while performing any adjustments or repairs.

Wedge Assembly Adjustment

As normal wear occurs and there is excessive “play” between the wedge and beam, adjust the bolts on the side of the wedge assembly to eliminate excess space between the wedge and the beam.

1.Loosen the jam nuts on the two adjustment bolts on the side of the wedge. See Figure 5-1.

2.Turn the adjustment bolts in until snug and then back them off slowly (approximately 1.5 turns) until the wedge assembly will slide on the beam.

3.Re-tighten the jam nuts securely against the side of the wedge to secure the adjustment bolts in this position.

ground it against the engine to prevent unintended starting. Always wear safety glasses during operation or while performing any adjustments or repairs.

Conditions that Will Void Warranty

1.Failure to maintain proper fluid level in reservoir

2.Changing the relief valve setting or pressure adjust- ment of control valve without proper knowledge and instruction from the factory

WARNING: Higher pressure could cause the hoses to burst, cylinder to rupture, and intense fluid to be released, which could result in serious personal injury.

3.Disassembling the pump

4.Use of incorrect hydraulic fluid

5.Allowing the flexible pump coupler to deteriorate without proper and regular inspection

6.Lack of lubrication or improper lubrication of the beam or unit

7.Improper adjustment of splitting wedge

8.Excessive heating of the hydraulic system

9.Attempting to start unit in temperatures under 20°F without pre-heating fluid in reservoir

10.Unattended leaks in hydraulic system

LS 27 TB specifications

The Troy-Bilt LS 27 TB is an innovative garden tiller designed to enhance productivity in any small to medium-sized gardening or landscaping project. This robust machine features a powerful engine and advanced technologies that streamline the tilling process, making it a valuable tool for both amateur gardeners and seasoned horticulture professionals.

One of the standout features of the LS 27 TB is its 27-inch tilling width. This ample width allows users to cover more ground in less time, reducing the number of passes required to prepare the soil. The tiller's adjustable tilling depth—ranging from 1 to 8 inches—enables precise soil preparation for varying plant root depths, ensuring optimal growing conditions for various crops.

Powered by a reliable, easy-start engine, the Troy-Bilt LS 27 TB offers ample horsepower to tackle tough soil conditions without compromising performance. The machine's forward and reverse gear options provide enhanced maneuverability, allowing gardeners to navigate tight corners and difficult spots with ease.

Incorporated into the design is the patented “Cultivator Attachment” system, which allows users to switch from tilling to cultivating tasks effortlessly. This versatility makes the LS 27 TB an excellent choice for multi-purpose gardening, as it can handle not only tilling but also other gardening tasks efficiently.

Safety is a priority with the LS 27 TB, which features a handlebar-mounted control system. This ergonomic design provides users with greater comfort while working, reducing fatigue during extended use. The tiller is also equipped with an automatic engagement system for the tines, ensuring that users can operate the machine with confidence.

Another notable characteristic of this tiller is its durable construction. Built to withstand the rigors of frequent use, the Troy-Bilt LS 27 TB features high-quality materials that ensure longevity. The robust wheels provide excellent traction, making it easier to navigate uneven terrain.

In summary, the Troy-Bilt LS 27 TB is a powerful and versatile tiller that combines innovative features, user-friendly controls, and durability. Whether preparing a small garden bed or working on a larger landscaping project, this tiller offers the performance and versatility needed to achieve gardening goals with ease. Its blend of technology and user-centric design sets it apart in the market, making it an ideal choice for anyone looking to enhance their gardening experience.

Troy-Bilt LS 27 TB Maintaining Your Log Splitter, Gib Adjustment, Wedge Assembly Adjustment

Models: LS 27 TB