5

Maintaining

Your Log

Splitter

WARNING

Excessive pressure when seating beads may cause tire/rim assembly to burst with force sufficient to cause serious injury. Refer to sidewall of tire for recommended pressure.

Set Screw

Side View-Coupler

.0600 .0100

Figure 5-3

IMPORTANT: Never hit the engine shaft in any manner, as a blow will cause permanent damage to the engine.

1.Remove three nuts that secure the pump to the coupling shield. Two nuts are at the bottom corners and one is in the top center. See Figure 5-3.

2.Remove the pump.

3.Rotate the engine by slowly pulling starter handle until engine coupling half set screw is visible. Loosen set screw using allen wrench and slide coupling half off engine shaft.

4.Loosen set screw on pump coupling half and remove coupling half.

5.Slide new engine coupling half onto the engine shaft until the end of the shaft is flush with the inner portion of the coupling half. (There must be space between the end of the engine support bracket and coupling half). Tighten set screw.

6.Install pump coupling half and key on pump shaft. Rotate coupling half until set screw faces opening in shield. Do not tighten set screw.

7.Install nylon “spider” onto engine coupling half.

8.Align pump coupling half with nylon “spider” by rotat- ing engine using starter handle. Slide coupling half into place while guiding three mounting bolts through holes in pump support bracket.

9.Secure with nuts removed earlier.

10.Set.010” to.060” clearance/gap between the nylon “spider” and the engine coupling half by sliding a feeler gauge or matchbook cover between the nylon “spider” and the engine coupling half and moving pump coupling half as needed. Secure pump coupling half with set screw. See Figure 5-3.

NOTE: Make certain proper clearance/gap is obtained before tightening set screw.

Tires

See sidewall of tire for recommended pressure. Under any circumstances do not exceed manufacturer’s recom- mended psi. Maintain equal pressure on all tires.

WARNING: Excessive pressure when seating beads may cause tire/rim as- sembly to burst with force sufficient to cause serious injury. Refer to sidewall of tire for recommended pressure.

14

Page 13 Page 15
Page 14
Image 14
Troy-Bilt LS 27 TB warranty Tires, Set Screw, Side View-Coupler 0600, Install nylon spider onto engine coupling half
Page 13 Page 15

LS 27 TB specifications

The Troy-Bilt LS 27 TB is an innovative garden tiller designed to enhance productivity in any small to medium-sized gardening or landscaping project. This robust machine features a powerful engine and advanced technologies that streamline the tilling process, making it a valuable tool for both amateur gardeners and seasoned horticulture professionals.

One of the standout features of the LS 27 TB is its 27-inch tilling width. This ample width allows users to cover more ground in less time, reducing the number of passes required to prepare the soil. The tiller's adjustable tilling depth—ranging from 1 to 8 inches—enables precise soil preparation for varying plant root depths, ensuring optimal growing conditions for various crops.

Powered by a reliable, easy-start engine, the Troy-Bilt LS 27 TB offers ample horsepower to tackle tough soil conditions without compromising performance. The machine's forward and reverse gear options provide enhanced maneuverability, allowing gardeners to navigate tight corners and difficult spots with ease.

Incorporated into the design is the patented “Cultivator Attachment” system, which allows users to switch from tilling to cultivating tasks effortlessly. This versatility makes the LS 27 TB an excellent choice for multi-purpose gardening, as it can handle not only tilling but also other gardening tasks efficiently.

Safety is a priority with the LS 27 TB, which features a handlebar-mounted control system. This ergonomic design provides users with greater comfort while working, reducing fatigue during extended use. The tiller is also equipped with an automatic engagement system for the tines, ensuring that users can operate the machine with confidence.

Another notable characteristic of this tiller is its durable construction. Built to withstand the rigors of frequent use, the Troy-Bilt LS 27 TB features high-quality materials that ensure longevity. The robust wheels provide excellent traction, making it easier to navigate uneven terrain.

In summary, the Troy-Bilt LS 27 TB is a powerful and versatile tiller that combines innovative features, user-friendly controls, and durability. Whether preparing a small garden bed or working on a larger landscaping project, this tiller offers the performance and versatility needed to achieve gardening goals with ease. Its blend of technology and user-centric design sets it apart in the market, making it an ideal choice for anyone looking to enhance their gardening experience.
Top Page Image Contents