True Food Service Equipment, Inc.
INSTALLATION / OPERATION INSTRUCTIONS
INSTALLATION / OPERATION INSTRUCTIONS
OWNERSHIP
To insure that your unit works properly from the first day, it must be installed properly. We highly recommend that your True unit is installed by your supplying dealer or service company. The cost of a professional installation is money well spent. Issues caused by incorrect installation may invalidate your warranty
Before you start to install your True unit, carefully inspect it for freight damage. If damage is discovered, immediately file a claim with the delivery freight carrier.
True is not responsible for damage incurred during shipment.
REQUIRED TOOLS
•Adjustable Wrench
•Phillips Head Screwdriver
•Level
UNCRATING
The following procedure is recommended for uncrating the unit:
A.Remove the outer packaging by pulling
B.Inspect for concealed damage. Again, immediately file a claim with the freight carrier if there is damage.
C.Remove door bracket on swinging glass door models (see image
Note: Keys for units with door locks are located in warranty packets.
1
LOCATING
2
A.Remove louver from the front of cabinet and backguard (if applicable) from rear of cabinet.
B.Skid bolts are located in each of 4 corners inside cabinet bottom. (See photo A).
C.Remove skid bolts. (See photo B).
D.Cut straps if applicable. (See photo C).
E.Carefully lift cabinet off of skid.
| A |
|
| B |
|
|
|
|
|
Removing skid from | C |
bottom of cabinet. |
|
4 | www.truemfg.com | 4 |