True Food Service Equipment, Inc.
INSTALLATION / OPERATION INSTRUCTIONS
INSTALLATION OF LEGS AND CASTORS
Securing Castors:
To obtain maximum strength and stability of the unit, it is important that you make sure each castor is secure. The bearing race on the castor on the top edge of the leg must make firm contact with the rail.
Unit Leveling:
Four leveling shims have been provided for leveling castored units positioned on uneven floors. Shims must be positioned between rail end and bearing race. True recommends a four shim limit to any single castor.
A.Turn the bearing race
B.Install the desired number of shims, making sure the slot of the shim is in contact with the threaded stem of the castor.
C.If more than one shim is used, turn the slot at a 90° angle so they are not in line.
D.Turn the bearing race clockwise to tighten and secure the castor by tightening the anchoring bolt with a 3/4 inch
CAUTION
To avoid damage to lower rail assembly, slowly raise
unit to upright position after installing castors.
1
Thread castor into the underside of cabinet frame rail.
|
|
|
|
|
|
|
|
|
2 |
| |||||||
|
|
| 3 |
| 4 |
| ||
For leveling, insert the shim | Use the tool provided to tighten the | Thread leg into cabinet | ||||||
between the castor and frame rail. castor into place. | bottom frame rail. |
5
The end of the leg is adjustable to easy leveling.
Lower Rail | Lower Rail Assembly |
Assembly |
|
| Rail End |
Rail End | Snug Fit |
| |
| Here |
Snug Fit | Bearing |
Here | Race |
| Leveling Shim |
LegCastor
5 | www.truemfg.com | 5 |