| TRUST 140BM LCD WIRELESS OBSERVATION SYSTEM |
|
| signal. Therefore, in order to have the best possible reception, try to avoid |
|
| these obstacles as much as possible. |
|
2. | People walking near the transmitter or receiver (particularly between the two) |
|
| may also reduce the quality of the reception. |
|
3. | Try to achieve the best possible reception by positioning the camera and the | U K |
| monitor correctly in relation to each other. Both devices have |
The aerials can be directed by moving the devices.
4.The device may be affected by external sources of interference, such as microwave ovens, the weather and other devices which use the same frequency as this device. If possible, turn these devices off when using the
TRUST 140BM LCD WIRELESS OBSERVATION SYSTEM.
4.7Expanding the wireless security system
If you have several
This monitor is ideal for use with other TRUST CONVENIENCE products. See the Trust website (www.trust.com) for more information. When a number of cameras are connected to this monitoring system, you must manually switch between the channels.
5 | Troubleshooting |
| |
Problem | Cause | Possible solution | |
No image on the | The power supply has not been | Check whether the power | |
monitor. | connected. | supply has been connected | |
|
|
| to the monitor and the |
|
|
| camera correctly. |
|
| The batteries have been | Reinsert the batteries |
|
| inserted incorrectly. |
|
|
| The batteries in the camera | Replace the batteries. |
|
| and/or the monitor are empty. |
|
|
| Another RF device is operating | Change the channel of both |
|
| on the same channel as the | the camera and the receiver. |
|
| TRUST 140BM LCD |
|
|
| WIRELESS OBSERVATION |
|
|
| SYSTEM. |
|
|
|
| Change the physical location |
|
| The camera is set up in a dark | of the camera (transmitter) |
|
| and/or the receiver by | |
|
| room and the Night mode has | |
|
| altering the direction or the | |
|
| not been selected. | |
|
| distance. | |
|
|
| |
|
|
| Select the Night mode on |
|
|
| the camera. |
|
| The monitor has been set to | Turn off the Auto mode or |
|
| the Auto mode. | adjust the noise sensitivity |
|
|
| level. |
|
|
| 5 |